Change Of Spring

[Karl Daw 14]

Guys does anyone know anyone near reading or basingstoke that would change a spring i have the spring,i went to test valleyand he said 45+vat,i thought that was expensive what do you think,what would you expect to pay?

 

all i want is it put in.

[barrywhite 282]

what gun

[Karl Daw 14]

eclipse

[barrywhite 282]

eclipse

What power is your gun now The eclipse goes up to a high power .I put a new spring in my omega it was shooting very high untill I cut loads of the spring the omega dosent go as high powered as the eclipse .so putting in a spring may be a bit more than just putting in a spring if it is a titan xs spring .If you have the original webley spring you may be fine .I had to assemble and disassemble my gun a lot of times cutting a coil or a half a coil at a time and test shooting the gun to get the power right.If your power is low you may correct it with a few washers .

[barrywhite 282]

the first time I change my spring in my omega I had a piece of metal bent a bit like a tuning fork I pushed it in the end of the gun held the spring pressure and removed the pin that holds the spring in .now I am older and I use a spring press i have made .getting the spring out is not that hard .45 plus vat that is a bit much but they have a shop to keep .but like I said to problem may be the power level .

[Marksman 934]

https://www.gunspares.co.uk/shopdisplayproducts.asp?Search=Yes&sppp=50

 

£9.39 + postage

 

Darryl

[Karl Daw 14]

https://www.gunspares.co.uk/shopdisplayproducts.asp?Search=Yes&sppp=50

 

£9.39 + postage

 

Darryl

Thanks marksman i meant putting one in but i managed to put the trigger back together myself and also a gun shop put a spring in there for a tenner so all sorted,cheers for your help mate,atb