Find Yourself A......

[ArchieHood 3,692]

............Old school type table and cut off 2 legs.

 

Cut into pieces and ask a mate to weld together and close ends with rubber stops.

 

Rub down and prime with spray can from Poundland.

 

Spray Black with can from above shop.

 

Insert fishing pole rollers from Ebay

 

Steal rubber feet from daughters laptop,

 

Voila...................

 

[/url]

[reaper1064 285]

Nice looking piece of kit there mate, just goes to show what can be done with bits and bobs.

[Marksman 934]

spot on that mate!!

 

What you then do is keep the bits you cut off and cut into 12" sections

weld a plate onto the bottoms

drill a 8-10mm hole in the square section 1" from the bottom of the plate

Fill with chalk

Set at desired distance

Aim and shoot at 10mm hole

Each time you get a "kill" you'll see a telltale puff of chalk

 

;-)

 

Darryl

Edited April 13, 2013 by Marksman

[iana 25]

Nice looking gun fella, what's te barrel and silencer spec?

[ArchieHood 3,692]

spot on that mate!!

 

What you then do is keep the bits you cut off and cut into 12" sections

weld a plate onto the bottoms

drill a 8-10mm hole in the square section 1" from the bottom of the plate

Fill with chalk

Set at desired distance

Aim and shoot at 10mm hole

Each time you get a "kill" you'll see a telltale puff of chalk

 

;-)

 

Darryl

 

................ watch this space .........

Nice looking gun fella, what's te barrel and silencer spec?

The shroud has been shortened and has a Twink mk2 silencer on the end protected by some 60mm shrink tube............

[Fieldsports 155]

Well done mate !
I like home made stuff thats well designed and the simplicity of this appeals to me.

Thanks for sharing

Steve

[pianoman 3,587]

Very nice Archie. Well done mate. Nice appealing girlie this week by the way Archie and very pretty. Always a pleasure of seeing and reading you posts!

 

Best regards.

Simon

[Craig Fosse 286]

I like this idea mate.... Might even do one for my remote control airplane!! Hahaha

[M_Blue 1]

Very nice,I'm pretty sure I've got some of that type of steel section at work,gonna give this ago as been looking for a rest.

Thanks for sharing.

 

Atb,

Mike

[scissorman 13]

Very nice picture, and a nice picture of the gun as well.

[stealthy1 3,964]

Your mate is a dab hand with a welder Arch