lodgekeeper 0 Posted March 31, 2013 Report Share Posted March 31, 2013 hi all i have a air arms s410 classic 10 shot and its not cycling properly when i try to load a pellet. it cocks ok but wont line the pellet up right with the barrel and you have to take the magazine out and click it round the rest of the way. it is as if it will only cycle half way then you have to do the rest by hand. does any one have any idea as to what will cause this and is there a easy fix. Quote Link to post
davyt63 1,845 Posted March 31, 2013 Report Share Posted March 31, 2013 hi buddy it sounds like your magazine indexing post is on its way out! take a look at it and replace it if needed? you can get your spare part here http://www.airarmsspares.com/air-arms-spares/ Quote Link to post
AirgunGuy 362 Posted March 31, 2013 Report Share Posted March 31, 2013 (edited) You could try gently bending the indexing post or as Davy T says...may need replacing Just to add...if the spring type lever is too far to the right (as you look down the rifle) it maybe jumping off the mag. You could try bending it slightly to the left...if memory serves...haven't had mine out for a while Edited March 31, 2013 by AirgunGuy Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.