pinkfoot 1 9 Posted April 5, 2013 Report Share Posted April 5, 2013 (edited) The X Searcher is a new add on head for the NM800 66mm lens at £75 i think this is a lot of money for a new head what do you lads think ,and i think this is what they have been useing and telling us it was the NM800ir look at FSB new video and look at the NM800 they are useing they look to be a lot bigger than the NM800ir that i have Edited April 5, 2013 by pinkfoot 1 Quote Link to post Share on other sites
weebster 17 Posted April 6, 2013 Report Share Posted April 6, 2013 You know your way round NV gear, is there a hidden agenda here with this thread? Yes....probably leading to 'nitehunters' great ir turbo ...if nm are using a 66mm head then they've copied what other's are doing imo,and a complete torch with 66mm lens can be built for £70. I'll stick to my home build oslon black zoomie http://i1009.photobucket.com/albums/af220/weebster6419/ir%20host/STA62455_zpsa63c1c15.jpg Small,compact and easy to zoom. Quote Link to post Share on other sites
72line per 21 Posted April 6, 2013 Author Report Share Posted April 6, 2013 i have been using the nite master as you can see in my vids i have also been telling people to buy the nite master You know your way round NV gear, is there a hidden agenda here with this thread? Yes....probably leading to 'nitehunters' great ir turbo ...if nm are using a 66mm head then they've copied what other's are doing imo,and a complete torch with 66mm lens can be built for £70. I'll stick to my home build oslon black zoomie http://i1009.photobucket.com/albums/af220/weebster6419/ir%20host/STA62455_zpsa63c1c15.jpg Small,compact and easy to zoom. i use the nite master with a power pack as you will see in my vids. i also have been teling people to buy the nite master ???????? Quote Link to post Share on other sites
weebster 17 Posted April 6, 2013 Report Share Posted April 6, 2013 The difference may well be down to the quality of the aspherical lens,they can vary quite a bit,and as said,just back of the focus a little The torch I made will focus down to the square diode with thick line and thinner lines coming of at right angles....just back off a little and I get a perfect circle well over 200yds. Quote Link to post Share on other sites
dean1 46 Posted April 6, 2013 Report Share Posted April 6, 2013 Weebster what driver and led are you putting in that torch? Quote Link to post Share on other sites
weebster 17 Posted April 6, 2013 Report Share Posted April 6, 2013 Weebster what driver and led are you putting in that torch? Oslon black,same as nm800ir,driver is a stand alone not a conventional pcb driver board as it runs off the 12v battery rather than 18650's. Quote Link to post Share on other sites
72line per 21 Posted April 13, 2013 Author Report Share Posted April 13, 2013 look on you tube under b4ger731 film <fox sniper cam> theres are to nite masters being used look at the difference in the beams . Quote Link to post Share on other sites
72line per 21 Posted April 26, 2013 Author Report Share Posted April 26, 2013 look on you tube under thefoxingchap i went to get some foxes with him . the farmer was loosing some lambs we got to foxes .but i wasn't pleased with the results from the ir watch and see . Quote Link to post Share on other sites
pinkfoot 1 9 Posted April 26, 2013 Report Share Posted April 26, 2013 look on you tube under thefoxingchap i went to get some foxes with him . the farmer was loosing some lambs we got to foxes .but i wasn't pleased with the results from the ir watch and see . Just looked at that video and mine and my pals do,s that , the f.....g 3 mode think gets on your tits why the f... . do,s it do that all the time 1 mode would be alot better i think.. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.