Deben Terrier Collars

[nangell 50]

hi i have locator collar that's faulty ,it will work untill you apply any pressure to cap,then it goes on or off ,tried differant caps but it still does the same ,so can anyone tell me where the best place to send it to be fixed ,thanks neil

[GORSYBANK 0]

mine is the same mate, is this the old type collar with screw top

[nangell 50]

mine is the same mate, is this the old type collar with screw top

it is mate , was hoping someone could point me in right direction for getting it mended ,

[GORSYBANK 0]

if you find out let me know and ill do same (yours is screw top type???)

may be worth giving dave arthur a call on 07951286630 hes just repaired 3 of my mk 1 boxes and made me a new collar for ferret dont know if he can do terrier collars?

keep me posted

lyndon

[nangell 50]

if you find out let me know and ill do same (yours is screw top type???)

may be worth giving dave arthur a call on 07951286630 hes just repaired 3 of my mk 1 boxes and made me a new collar for ferret dont know if he can do terrier collars?

keep me posted

lyndon

thanks for that lyndon,will give him a bell

[young man 225]

take to the we connection with a bit off sand paper,make sure theres no dirt stoping the connection a.t.b

[liamdelaney 2,587]

take to the we connection with a bit off sand paper,make sure theres no dirt stoping the connection a.t.b

Also try putting some tinfoil in the cap(at the back)it sometimes gives a better connection.

[gouldy257 79]

i've the same problem we one of my collars and i tried it doesn't work... any more ideas ill try 2 lol

[nangell 50]

take to the we connection with a bit off sand paper,make sure theres no dirt stoping the connection a.t.b

 

 

i've the same problem we one of my collars and i tried it doesn't work... any more ideas ill try 2 lol

hi thanks for both replies, i have tried both these but it still the same ,think the fault is in the plastic case the cap screws into

[gouldy257 79]

 

take to the we connection with a bit off sand paper,make sure theres no dirt stoping the connection a.t.b

 

 

>i've the same problem we one of my collars and i tried it doesn't work... any more ideas ill try 2 lol

hi thanks for both replies, i have tried both these but it still the same ,think the fault is in the plastic case the cap screws into

 

same as that,,,, doubt bin ill be only answer as nobody nos lol

[pipa 299]

Try looking inside the caps, there should be a thin plastic liner on the inside wall of the cap where the first battery sits?

Chris

[chilli 381]

If the copper electrode in the resin is not petruding through the resin , then it will not work properly . This is easily reolved by putting a small amount of solder on it .

[nangell 50]

Try looking inside the caps, there should be a thin plastic liner on the inside wall of the cap where the first battery sits?

Chris

hi chris ,yes there is a plastic liner inside the cap,i have a couple of collars and tried other cap on this collar ,but still the same

[nangell 50]

If the copper electrode in the resin is not petruding through the resin , then it will not work properly . This is easily reolved by putting a small amount of solder on it .

hi chilli , had alook at it and the copper is flush with the resin ,will find out the solder iron and have ago at removing some of the resin ,will let you know how i get on

[gouldy257 79]

 

If the copper electrode in the resin is not petruding through the resin , then it will not work properly . This is easily reolved by putting a small amount of solder on it .

hi chilli , had alook at it and the copper is flush with the resin ,will find out the solder iron and have ago at removing some of the resin ,will let you know how i get on

 

did yours fix out any?? mate mine is level to with copper to....