james t 36 Posted March 14, 2013 Report Share Posted March 14, 2013 must be timber framed house if external walls arent blockwork youll have to cut out plasterboard noggin it out and ply it id bolt it to noggins then silicone all back of cabinet not come away easy that Quote Link to post
smoothfinish 26 Posted March 14, 2013 Report Share Posted March 14, 2013 Hi mate don't know if you have already sorted it but all your outter walls will be dot and dab with a 6mm gap at the most unless your house is timber frame then your stuck just try a 20m drill bit that will easy plug the block work mate just follow your shockets and rads Quote Link to post
iana 25 Posted March 15, 2013 Report Share Posted March 15, 2013 15mm threaded bar drilled into the blockwbork then set with resin. Once that's set it will never Come out. If you get the right resin it has working loads and with the 15mm bar you would be looking at almost 2 tonne per bolt/bar!!! Quote Link to post
Cliff Ray 185 Posted March 15, 2013 Report Share Posted March 15, 2013 Just make it too big to move. My house is wooden frame and wood cladding so no bricks at all. I welded my own 3ft x 2ft x 6ft cabinet and the police are perfectly happy with it not being bolted to brickwork. The extra plus point is there is also plenty more room for more rifles, shotguns and even an RPG is only I could get the variation Quote Link to post
toogood*10 0 Posted March 15, 2013 Report Share Posted March 15, 2013 Try the downstairs floor, under the stairs or somewhere obviously not in the middle of the kitchen lol Quote Link to post
reeking rabbits 15 Posted March 15, 2013 Report Share Posted March 15, 2013 (edited) If its plasterboard fixed on to a timber frame house like mine, this is what i did.... I used a 650mm wide strip of wooden block board, this was then screwed onto 2 of the wall studs inside a cupboard then the cabinet was screwed onto the board and into the floor. Police were more then happy with it, he even commented on how well fixed it was. If you find concrete or blockwork to fix to i wouldn't bother going to the extra hassle of using resin and threaded bar etc, get yourself some Thunderbolts.. their designed for fixing into block, concrete etc take a serious grip! all you do is drill the hole then tighten the bolt up!! Edited March 15, 2013 by reeking rabbits 1 Quote Link to post
scotfalconer 7 Posted March 15, 2013 Report Share Posted March 15, 2013 If its plasterboard fixed on to a timber frame house like mine, this is what i did.... I used a 650mm wide strip of wooden block board, this was then screwed onto 2 of the wall studs inside a cupboard then the cabinet was screwed onto the board and into the floor. Police were more then happy with it, he even commented on how well fixed it was. If you find concrete or blockwork to fix to i wouldn't bother going to the extra hassle of using resin and threaded bar etc, get yourself some Thunderbolts.. their designed for fixing into block, concrete etc take a serious grip! all you do is drill the hole then tighten the bolt up!! think this is the road i will go down as i am in the same boat,maybe store it in attic Quote Link to post
robwelsh 354 Posted March 15, 2013 Author Report Share Posted March 15, 2013 i too was thinking attick , as its a bare brick wall there, no studs,plasterboard and skirting board to feck about with, filled in both forms today, still undecided as to what calibre to put. im defintely putting down for a .223. a 12g, Fac air. and .17hmr OR .22lr.all the videos iv seen and heard people shoot the .22lr out to , doesnt really give me any benefit over a bloody airgun though, as a sub 12 can be pushed to 70yards. but i do have large open permission also, which is almost impossible with an airgun lol and it is good land. Quote Link to post
halamrose 24 Posted March 15, 2013 Report Share Posted March 15, 2013 Maybe you can do 70 yds with an air gun on targets where you know the range, but I'm rubish at judging range therefor holdover so stick with distances where they are still flying resonably flat. Thats say 30yds air rifle, 50 yds FAC air, 60 yds 22LR subs and maybe 120 Yds HMR. Quote Link to post
robwelsh 354 Posted March 15, 2013 Author Report Share Posted March 15, 2013 If u can tell where 30-50-60-120 yrds are ,your pretty good mate lol its the same with anything, practice and more practice. 70 yrds on targets regular will familiarise yourself with size of target in scope at say x10. If I'm not 100% I won't take shot. Obviously misses are inevitable. Atb mate Quote Link to post
toogood*10 0 Posted March 15, 2013 Report Share Posted March 15, 2013 tried to pm you but wouldnt let me, here is a one of my posts, im in a similar situation there is some good comments of advive http://www.thehuntinglife.com/forums/topic/277450-help-my-police-inspection-tomorrow/ Quote Link to post
robwelsh 354 Posted March 15, 2013 Author Report Share Posted March 15, 2013 Cheers mate. Read it all. I don't think il get it cos of my past. Nothing to loose though, although last time I got in any trouble was 3years ago. And not anything since, living with my partner, got a 4month baby and iv changed my ways a lot. So hopefully they will see that. Quote Link to post
paulus 26 Posted March 16, 2013 Report Share Posted March 16, 2013 Just make sure you put everything down on the application they will have to consider it on its own merrit then, as they will have nothing to pick up on Quote Link to post
robwelsh 354 Posted March 16, 2013 Author Report Share Posted March 16, 2013 I have done paulus mate. The box is feckin tiny though , but I fitted it all in...eventually lol getting the referees done today, then il send my form off. How long shall I expect? For the home meeting, or if they think I'm not suitable will they not even come? Lol cheers Quote Link to post
scotfalconer 7 Posted March 16, 2013 Report Share Posted March 16, 2013 as i said in earlier post i was going to put my cabinet in attic as i have a timber frame house,would it be acceptable to lay an upright cabinet horizontally across joists (3) and secure with 70mm coach bolts? or does it have to be fitted vertically? thanks in advance Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.