Someone Who Can Fix My Eclipse Berkshire/hampshire

[Karl Daw 14]

Guys i have given my gun to someone who said that they could make my trigger smoother and also put a new spring in,they messed it up, then i took to a shop in hungerford and they said they could fix it ,but then said they couldnt work out how to sort the trigger out also there spring compressor was not big enough does anyone know of a gunsmith that could privatly sort this out for me.

 

Cheers Karl

[davyt63 1,845]

hi Karl

would it be this Eclipse ?

 

http://www.gunspares.co.uk/shopdisplayproducts.asp?id=24520&cat=Eclipse

[Karl Daw 14]

hi Karl

would it be this Eclipse ?

 

http://www.gunspares.co.uk/shopdisplayproducts.asp?id=24520&cat=Eclipse

Yes mate it would be that one why can you help me? or know someone who can

[barrywhite 282]

I would think the trigger is the same as the webley omega.did you have trouble cocking the gun?.if so ,so did I .A bad design .I did a temp fix by bashing a part of the trigger to swell a piece of the metal but it lasted not that long.So to fix the cocking problem ,I had to button the piston[laser glide] so the piston fitted tightly in the cylinder. this helped the trigger to engage when the gun was cocked .I still think the trigger will fail in the future .I bet other people have had this problem .I would not spend to much on gun if I were you .

[barrywhite 282]

and assembling the trigger is a bit of a problem

[barrywhite 282]

do you ever pass west london

[barrywhite 282]

and if I remember there are two bits out of the trigger that could be lost easy a little ball may be plastic and a very tiny spring .

[Karl Daw 14]

I would think the trigger is the same as the webley omega.did you have trouble cocking the gun?.if so ,so did I .A bad design .I did a temp fix by bashing a part of the trigger to swell a piece of the metal but it lasted not that long.So to fix the cocking problem ,I had to button the piston[laser glide] so the piston fitted tightly in the cylinder. this helped the trigger to engage when the gun was cocked .I still think the trigger will fail in the future .I bet other people have had this problem .I would not spend to much on gun if I were you .

no mate i didnt even atempt the repair someone did and then theysaid they couldnt do it,so im not sure whatthey have done.

 

sorry mate i dont justgo past london thanks anyway mate

[barrywhite 282]

 

I would think the trigger is the same as the webley omega.did you have trouble cocking the gun?.if so ,so did I .A bad design .I did a temp fix by bashing a part of the trigger to swell a piece of the metal but it lasted not that long.So to fix the cocking problem ,I had to button the piston[laser glide] so the piston fitted tightly in the cylinder. this helped the trigger to engage when the gun was cocked .I still think the trigger will fail in the future .I bet other people have had this problem .I would not spend to much on gun if I were you .

no mate i didnt even atempt the repair someone did and then theysaid they couldnt do it,so im not sure whatthey have done.

 

sorry mate i dont justgo past london thanks anyway mate

well keep it in mind ..it should only take a few minuets to assemble the gun if all the parts are there and working correctly ...good luck

[Karl Daw 14]

just wondered if anyone would be able to help me out here if they know how the trigger goes back together please

[ArchieHood 3,692]

How far are you from Poole?..............http://www.airguntune.co.uk/index.html

[andyfr1968 772]

I hope you get sorted, mate. They're a cracking rifle when working correctly but those triggers can be a pig.

[barrywhite 282]

looking on chambers the order of assembly are going from memory .cs236 sr018 sr019 they are held in place with pins .you have to line them up and put the pins in they want to move cs236 sr018 first then sr019.then cs235 and tr018 .tr018 locates in a tiny hole in the trigger and the pin goes through the trigger and the spring tr018 .next is cs237 and sr020 this not to hard the spring is left loose. you then tighten the spring and hold the tightened spring in place with the last pin.someone with a bit of a clue may be able to follow what i have written .

[davyt63 1,845]

looking on chambers the order of assembly are going from memory .cs236 sr018 sr019 they are held in place with pins .you have to line them up and put the pins in they want to move cs236 sr018 first then sr019.then cs235 and tr018 .tr018 locates in a tiny hole in the trigger and the pin goes through the trigger and the spring tr018 .next is cs237 and sr020 this not to hard the spring is left loose. you then tighten the spring and hold the tightened spring in place with the last pin.someone with a bit of a clue may be able to follow what i have written .

 

[Karl Daw 14]

looking on chambers the order of assembly are going from memory .cs236 sr018 sr019 they are held in place with pins .you have to line them up and put the pins in they want to move cs236 sr018 first then sr019.then cs235 and tr018 .tr018 locates in a tiny hole in the trigger and the pin goes through the trigger and the spring tr018 .next is cs237 and sr020 this not to hard the spring is left loose. you then tighten the spring and hold the tightened spring in place with the last pin.someone with a bit of a clue may be able to follow what i have written .

Ok mate i will try this wheni have chambers diagram infront of me thanks barry