S410 Barrel

[ozzieowl 53]

i have a 22 s410 is it hard to put a new barrel on can anyone explain also where can i get one thanks john

[Tron 173]

Hiya John, It is very easy to remove and replace a AA 410 barrel, To do so first remove the magazine retaining clip on the front of the receiver , it is the part at the very front of the scope mounting rails. underneath that there is two 3m/m grubscrews which hold the barrel in place, slacken off by at least 4 complete turns then carefully twist the barrel out. on re asembly make sure the transfer port in the brass bush which has to be glued to the replacement barrel is in a six oclock position when you fit the replacement barrel. as if it is not correctly aligned the air flow will be masked and affect the power output. Are you changing callibre's as well?? If so you will need a new bolt assembly as a .22 bolt ass, will not fit a .177 barrel . use extreme care when tightening the grub screw that retains the brass bush as overtightening will distort it and will cause pellet damage when loading. Dont be put off it really is a simple job only the four screws to complete removal and reasembly.

[ozzieowl 53]

What glue do I use and where do I put it thanks very much join

[Tron 173]

The AA 400/410 series rifles have a brass chamber fitted on the receiver end of the barrel, I have allways used a smear of epoxy resin to secure it to the barrel, this can allways be removed by applying heat to it... If your replacement barrel comes without one fitted you can use your existing one to put on it. Rememember if you are changing calibres from .22 to.177 then your .22 brass chamber will not be any good, you will have to change the Bolt ass, and the brass chamber part. as said earlier it is a simple job to remove/refit. I dont know where you will get a replacement from try Chambers or AArms. the last time I looked a Classic .22 barrel cost £95.00. Cheers.

[ozzieowl 53]

ive got the barrel 94 pound it as the brass piece thanks for your help really appreciated just hope i do it right the gun came with no barrel its a 22 and staying a 22

[Tron 173]

Thanks Ozzie. It is appreciated when the asker thanks for information received. Good man,

[ozzieowl 53]

your welcome i will let you know when ive fitted it cheers again john

[ozzieowl 53]

just need a good silencer now