JohnGalway 1,043 Posted February 9, 2013 Report Share Posted February 9, 2013 Like the one pictured below, except that the middle section would be a lot longer/taller? Quote Link to post
sussex 5,777 Posted February 9, 2013 Report Share Posted February 9, 2013 John could you not use two of them ? if you had a peice of tube were the torch goes then clamp another on or would that be to high.. I.ve got a problem with my clulite reflecting of the mod , a mate is going to make me a new holder to raise it higher to try & cure the problem .at the moment i.ve taped a piece of black plastic to the bottom of the torch, its helped but looks shite . Quote Link to post
JohnGalway 1,043 Posted February 9, 2013 Author Report Share Posted February 9, 2013 Yeah, got that suggestion elsewhere. Second mount is coming from China, trouble is it'll take a month to arrive. I was looking at UK prices and they want four times the money for the same thing, lol. My few Euro went to the Far East Quote Link to post
sussex 5,777 Posted February 9, 2013 Report Share Posted February 9, 2013 Cheap these chinese ,they need to get there fingers out .....4 weeks will fly by john longs your not holding your breath Quote Link to post
JohnGalway 1,043 Posted February 9, 2013 Author Report Share Posted February 9, 2013 Only way i found to stop reflection is mount the light under the barrel or take off your Mod, i tried alsorts gave up in the end and Bought an Archer Night Vision solved all my probs. no reflection no lamp shinning over houses and no frightening spooky Charlies . Not an option Quote Link to post
charlie caller 3,654 Posted February 10, 2013 Report Share Posted February 10, 2013 Only way i found to stop reflection is mount the light under the barrel or take off your Mod, i tried alsorts gave up in the end and Bought an Archer Night Vision solved all my probs. no reflection no lamp shinning over houses and no frightening spooky Charlies . put a neoprene cover on your moderator, job sorted,or at least it was for me Quote Link to post
SUNDAYBAIN 19 Posted February 10, 2013 Report Share Posted February 10, 2013 What about these johnhttp://ant-supplies.co.uk/Pages/FigureOfEightScopeMounts.aspx Quote Link to post
JohnGalway 1,043 Posted February 10, 2013 Author Report Share Posted February 10, 2013 My thinking is that it was down to the moisture in the air. I am doubtful it's to do with the moderator. Holding a light waist height and looking at something is different to holding a light eye/scope height and looking at something while also looking down the beam. I think. Quote Link to post
kruby01 114 Posted February 14, 2013 Report Share Posted February 14, 2013 I have a neoprene cover on mine and it lights the f*cking thing up like a lightsaber. I have a mount that the lamp just pulls in and out of so I keep it out until I spot those two little red reflections and then put it back on the mount to prepare for the shot Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.