smecky 52 Posted January 29, 2013 Report Share Posted January 29, 2013 Just got a new aa spring today for my rifle that's shooting at 10.30 ft lb using aa fields. So a clean and a spring was needed. Changed everything and its doing 25 ft lb. has the shop sold me a fac spring?????? As I've put my old one back in and it's running the same. Thanks Quote Link to post
pete123 45 Posted January 29, 2013 Report Share Posted January 29, 2013 I would take it back to shop mate they sold you one un-fit for use. Try and get a genuine AA spring for the rifle mate. Stay away from power like that mate! What make was the spring? And to be fair mate 10ftlb is not a major loss in power and will do what's needed for a sub 12 rifle. If you want it nearer 12 and unsure as to why you have got a dramatic power increase I would just get the gun smiths to do it. That way they are in the wrong if they hand it over to you over 12ftlb and I can't see them doing that. Although from them selling you a spring for your tx that gave you 25ftlb I'm not sure I would trust them too much. Quote Link to post
smecky 52 Posted January 29, 2013 Author Report Share Posted January 29, 2013 They said it was a genuine replacement. From Manchester air guns. Im not happy. Quote Link to post
pianoman 3,587 Posted January 29, 2013 Report Share Posted January 29, 2013 Take it back to them smecky and demand they detune it to 11.5 or thereabouts. Pete was absolutely correct in what he said mate. They have actually broken the law in a major way and a word to the police would bring them up before a criminal court, bloody sharp! Quote Link to post
pete123 45 Posted January 29, 2013 Report Share Posted January 29, 2013 I may be wrong and missing something but i wouldn't believe a genuine tx200 spring could give you 25ftlb unless you made some serious mods. was there any packaging with a name on the spring. A lot of springs such as ox springs claim to be direct replacements but have been known to take it over 12ftlb. I'm sure someone on here with more knowledge than myself will point you in the right direction. But you have done right to take it out! Quote Link to post
brassneck 128 Posted January 29, 2013 Report Share Posted January 29, 2013 get it sorted asap , 5-10years you got there !! i bought a mk1 rapid once , shot a magpie off the roof , thought to myself that was a fair crack , took it to me mates house it was doing around 28ftlb , lucky i didnt take down local gun shop because there grassing fekas Quote Link to post
pete123 45 Posted January 29, 2013 Report Share Posted January 29, 2013 I had an s400 classic once, took it into gun shop to get filled as I was a cheap skate and didn't want to buy my own tank. I got an comment as they said it was shooting 15, I told them to sort it as they had sold me the gun. Turns out that a torque screw on the side had come loose and turned it up.(not sure the truth in that). The scary thing was that if mr plod took it away my excuse of not owning a chrono would have been laughed at! Luckily enough I have a FAC air slot free on my ticket so worse comes to worse you could always give me the gun lol. Quote Link to post
smecky 52 Posted January 29, 2013 Author Report Share Posted January 29, 2013 No it was in no packaging. Will be phoning them tomorrow. Quote Link to post
andyfr1968 772 Posted January 29, 2013 Report Share Posted January 29, 2013 (edited) 25 from a TX??? No way unless it's dieseling it's sack off. Edited January 30, 2013 by andyfr1968 3 Quote Link to post
barrywhite 282 Posted January 29, 2013 Report Share Posted January 29, 2013 has to be dieseling .or your calculations are wrong .or your crono reading are wrong . 1 Quote Link to post
andyfr1968 772 Posted January 30, 2013 Report Share Posted January 30, 2013 (edited) . Edited January 30, 2013 by andyfr1968 Quote Link to post
AirgunGuy 362 Posted January 30, 2013 Report Share Posted January 30, 2013 Get that spring out ASAP!!! Quote Link to post
iana 25 Posted January 30, 2013 Report Share Posted January 30, 2013 If you ring AA direct they will send you a service kit out in the post. I rang a year or so ago for one and they sent it FOC!!! Came with the spring/guide/washers/lube. Quote Link to post
smecky 52 Posted January 30, 2013 Author Report Share Posted January 30, 2013 Yeah same as! As I removed this spring the piston weight was completely wedged in it. Could this of been the cause. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.