bullit666 5 Posted February 18, 2013 Report Share Posted February 18, 2013 Im going to knock up the exact nv setup rolaids has done in the video. I got family in the usa so I can get all the bits. I would say I can get it all for £220 If its successful im might start knocking them up for a small fee. 1 Quote Link to post Share on other sites
bradv8 0 Posted March 1, 2013 Report Share Posted March 1, 2013 actually tried this setup following ur steps n have found the following befor installing the camera u need to remove the led ring of bulbs by unscrewing the lens cover n simply cutting them off the lens needs to be a 16mm cheap one from ebay for about £5 n simply undo the grub screws n unscrew the lens n replace with a 12mm thread 16mm lens also when u have the lens removed ther is a piece of glass inside the camera that needs to be removed right in the bottom with a small screw driver, it helps the camera pick up the ir this setup is good for about 25 yds, anymore you will need a better ir illuminator, i have this setup on my leapers 6-14 scope on 6x zoom cause it doesnt work to well on full zoom hope this helps as have been following this for a while have mounted my screen on the side of my gun which saves looking down n you can hold the gun close to how you would originally!!! Quote Link to post Share on other sites
ghillies 209 Posted March 2, 2013 Report Share Posted March 2, 2013 camera wise your looking for at least 0,001lux. sens up is a croc..slows the frame rate basically.. go to hi with it and a bloke could walk past and you wouldnt see him. last..olsan black IR's... for the price they are spot on. bit of piddling about but well worth it. you'll have trudge through on here about them, theres a couple different olsons but one in particular for the IR, and a 950nm one worth a look http://nightvisionforumuk.com/index.php?sid=a21dcc8a6d44e36563c59cb819c342ef Quote Link to post Share on other sites
evenbad 8 Posted April 24, 2013 Report Share Posted April 24, 2013 Bullitt 666 add me on you list when you start selling them def interested mate Quote Link to post Share on other sites
bullit666 5 Posted May 25, 2013 Report Share Posted May 25, 2013 Yeah will do mate. I've just had it turn and ill make it up this week. I'll have to calculate what it all cost and ill give you all a real idea of costs. I'll post a new thread with video link etc when it's all sorted Quote Link to post Share on other sites
bullit666 5 Posted June 6, 2013 Report Share Posted June 6, 2013 Well I had it all calculated. Then I bought a markylight..... Let me tell you they are amazing little lights. A little heavy but, so far I reckon it'll see about 200 yards with the kt&c bullet cam. Now it's built I could not have bought a lot of parts. I needed kt&c Camera with 12mm lens Weaver picitanny rail x2 90 degree weaver mount 30mm weaver HIGH mounts 25 mm weaver HIGH mounts (I have a 1inch and 30mm scopes) LCD screen (I didn't bother with dvr) Li-ion battery 12v dc splitter cable Bnc adaptor (from RCA to BNC for video) Depending on the ir illuminator you use a mount for that Red filter for theatre lighting. (Cheap and thin) Ir illuminator I went with a markylight 50mm Quick look at setup http://youtu.be/8cSmQt0dhus Quote Link to post Share on other sites
rtaylor 1 Posted June 19, 2013 Report Share Posted June 19, 2013 Well I had it all calculated. Then I bought a markylight..... Let me tell you they are amazing little lights. A little heavy but, so far I reckon it'll see about 200 yards with the kt&c bullet cam. Now it's built I could not have bought a lot of parts. I needed kt&c Camera with 12mm lens Where did you get the camera and lens from? Any chance of posting some links? Also where did the markylight come from? Cheers Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.