Wiring Lamp To Lithium Battery

[alfie71 24]

alrite lads just treated myself to a 14amp lithium battery and lightforce lamp .its got the cigarette conector which is rubbish .can i just wire it up straite to the battery as ive noticed theres a fuse on the lamp cigarette connector .does there need to be an inline fuse ? Cheers

[hedz31 1,308]

My cigarette adaptor that came with my battery is sound maybe ye have a faulty 1 ??

[Gooner 143]

I would use an in line fuse stops bulbs from blowing

[paulus 26]

be carefull how you rewire anything on a lithium, best just to secure the one thats on it with tape although a few lads have changed the plugs over to a better type

[graham4877 1,181]

My lance one is shit.. like a sloppy fanny.. all i did was tape it in place when i used it..with lekky tape......

but now my tracer 140 is tight as feck no tape no messing on

[R.A.W 1,987]

if you cut the wires mate you loose the warranty

[Millet 4,497]

As raw say's you will loose any warrenty if you tamper..just tape everything up like Paulus said and grin and bare it till the warrenty run's out's..who know's you might get used to it..i have with my cigar socket type fitting..

Edited January 15, 2013 by Millet

[alfie71 24]

cheers lads hav had a look at it tonite and taped it up so hopefully should be ok now .nowt worse than a tempramental lamp .cheers

[Rake aboot 4,935]

First thing I did with my lithium tracer set up was to fit a qualcast lawnmower plug and socket to it.

[jamesmc 582]

First thing I did with my lithium tracer set up was to fit a qualcast lawnmower plug and socket to it.

thats the way i would do it pal

[dytkos 17,784]

I've got a two piece microphone connector on mine. Brilliant and solid.

Have put pics on before but there on another PC so can't now.

 

Cheers, D.

[TOMO 26,067]

As raw say's you will loose any warrenty if you tamper..just tape everything up like Paulus said and grin and bare it till the warrenty run's out's..who know's you might get used to it..i have with my cigar socket type fitting..

 

I did that at first taped the cigar socet up, real nice and tight, and it was great for a while,,, but eventually the solder on the inside of the socket gave way,,,

[Millet 4,497]

I unscrew the socket and put a ball of tape around the wire near the solder..then srew it back together the tape will act like a kind of plug and stop the soldered wire from being pulled ..

[TOMO 26,067]

Good idea,,, but to late now...lol

[Millet 4,497]