Help Please

[M47KS_M4N_CH71S 50]

hi guys wanting to take the cylinder off of my hw100t to camo wrap it, just wondered if any of u know how to?

 

thanks chris

[risingfriend 1,042]

if it is the quickfill version mate just unscrew it, if non qf then you will need to empty cylinder of air and the undo. may be easier to remove from the stock though just remove the two allen screws. ATB Aaron

[M47KS_M4N_CH71S 50]

Thanks pal ill have a look.

[M47KS_M4N_CH71S 50]

if it is the quickfill version mate just unscrew it, if non qf then you will need to empty cylinder of air and the undo. may be easier to remove from the stock though just remove the two allen screws. ATB Aaron

 

okok spot on pal quick question does this need to say on???? pic below

 

http://i1138.photobucket.com/albums/n521/sxirchris/image_zps0bd5aa01.jpeg

[stubby 175]

Im sure they put it there for a reason when they developed the gun, not normal to add bits that are of no use

[risingfriend 1,042]

Hi the barrel band is there for support of cylinder and barrel and the front stock stud secures to this so serves a purpose but you can get a custom one that only secures the air cylinder so the barrel is free floating. your choice really but i would leave well alone as the hw100 is a quality and deadly accurate gun standard. ATB Aaron

[M47KS_M4N_CH71S 50]

Ok thanks guys

[M47KS_M4N_CH71S 50]

All sorted mow thanks