Jump to content

timber dog runs (any good sites)


Recommended Posts


The joiner who's number I gave you can do those ...... you should see his!

 

would it work out cheaper to get someone like that to do a run?? im looking at wanting some where around a 10ft x 4ft x 5ft - 10ft x 6ft x 6ft

Link to post
Share on other sites

I'd have thought that if you can find a local joiner who has got a few days with no work then he'd rather earn a few quid than sit at home.

I know my mate is dead busy, but I'd bet there will be a local lad, might be best having a look at the other runs you see on here, all the good ones seem to be brick or block at the bottom.

 

My dog sleeps on my bed with me so I wouldn't know the first thing about them.

 

 

 

 

He doesn't really of course, he has a leopard print blanky in the kitchen :laugh:

  • Like 2
Link to post
Share on other sites

I'd have thought that if you can find a local joiner who has got a few days with no work then he'd rather earn a few quid than sit at home.

I know my mate is dead busy, but I'd bet there will be a local lad, might be best having a look at the other runs you see on here, all the good ones seem to be brick or block at the bottom.

 

My dog sleeps on my bed with me so I wouldn't know the first thing about them.

 

 

 

 

He doesn't really of course, he has a leopard print blanky in the kitchen :laugh:

 

its been hard enough to get the missus to let me :icon_redface: have a run so we've (she's) decide on something like http://www.ebay.co.uk/itm/221169603065?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648 but id want another door on the run side. and for 350ish i didnt think it was too bad but not 100%

 

there is supposed to be a place in rhos that does sheds and runs at a good price :hmm:

Link to post
Share on other sites

got one here i dont use 10 x 4 this one £100 but you would have to collect also the back panel is in one piece 10 x 7 and made from inch thich planks, takes 4 blokes to move but could be cut down and rejoined, its all bolted togeather :thumbs:

post-896-0-48970300-1357377313_thumb.jpg

Link to post
Share on other sites

got one here i dont use 10 x 4 this one £100 but you would have to collect also the back panel is in one piece 10 x 7 and made from inch thich planks, takes 4 blokes to move but could be cut down and rejoined, its all bolted togeather :thumbs:

 

Wow ................... That's a good pic for you lol you wouldn't be able to get 1 of the front and where abouts are you, cheers fella

Link to post
Share on other sites

got one here i dont use 10 x 4 this one £100 but you would have to collect also the back panel is in one piece 10 x 7 and made from inch thich planks, takes 4 blokes to move but could be cut down and rejoined, its all bolted togeather :thumbs:

 

Wow ................... That's a good pic for you lol you wouldn't be able to get 1 of the front and where abouts are you, cheers fella

just for you, it could do with another coat of preservative, its got a sectioned off 4x4 kennel with a 6 x4 run and its about 15 mile from tamworth

post-896-0-09479500-1357385215_thumb.jpg

post-896-0-89724300-1357385220_thumb.jpg

post-896-0-33325900-1357385226_thumb.jpg

Link to post
Share on other sites

got one here i dont use 10 x 4 this one £100 but you would have to collect also the back panel is in one piece 10 x 7 and made from inch thich planks, takes 4 blokes to move but could be cut down and rejoined, its all bolted togeather :thumbs:

 

Wow ................... That's a good pic for you lol you wouldn't be able to get 1 of the front and where abouts are you, cheers fella

just for you, it could do with another coat of preservative, its got a sectioned off 4x4 kennel with a 6 x4 run and its about 15 mile from tamworth

 

doesnt look a bad set up, if i get stuck i'll defo give you a PM. :thumbs:

Link to post
Share on other sites

theres another fella on ebay that uses better wood than the one you put up, 2x2 framing and 18mm shiplap floor and roof is 22mm, easily assembled and a decent bloke, he wouldny deliver all the way up to me so i met him at appleby.

it was easy to build just screw togeather and felt roof job done, he was from the lincoln area hope this helps

Link to post
Share on other sites

Morgan's Oswestry.

 

i looked on their site and seem a bit expensive for what it looked like + only listed a 8 x4, do you know if they have more if you go there?

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...