Rangioran 2 Posted February 19, 2013 Report Share Posted February 19, 2013 Got my .177 KTS a couple of weeks back and have to admit, after fitting the V-Mach kit it really does feel like a nice fit. Incidentally, Bisley swivels are fine in the synthetics stock so long as you make sure the 'pilot' hole you drill leaves a good amount of material for the thread to pick up on. Used my drill on slow-speed screwdriver mode to insert the pin, then reattached the swivel. Quote Link to post
j j m 6,533 Posted February 19, 2013 Report Share Posted February 19, 2013 id go for 177 mate Quote Link to post
Kent_keith 46 Posted February 19, 2013 Report Share Posted February 19, 2013 Got my .177 KTS a couple of weeks back and have to admit, after fitting the V-Mach kit it really does feel like a nice fit. Incidentally, Bisley swivels are fine in the synthetics stock so long as you make sure the 'pilot' hole you drill leaves a good amount of material for the thread to pick up on. Used my drill on slow-speed screwdriver mode to insert the pin, then reattached the swivel. Hi, what about the front one fella? How did you attach that one? Quote Link to post
Rangioran 2 Posted February 20, 2013 Report Share Posted February 20, 2013 Got my .177 KTS a couple of weeks back and have to admit, after fitting the V-Mach kit it really does feel like a nice fit. Incidentally, Bisley swivels are fine in the synthetics stock so long as you make sure the 'pilot' hole you drill leaves a good amount of material for the thread to pick up on. Used my drill on slow-speed screwdriver mode to insert the pin, then reattached the swivel. Hi, what about the front one fella? How did you attach that one? Use a 14.5mm Bisley swivel with a single turn of black insulation tape between it and the cocking lever, both for snug fit and to protect metal finish. Works just fine. Quote Link to post
pianoman 3,587 Posted February 20, 2013 Report Share Posted February 20, 2013 (edited) Welcome to the section here Pestsniper! You'll be fine with .177 but, given the higher power you are allowed in the US, .22 would be the one I'd go for, judging by what you American fellows have by way of vermin/varmints. But, then again, .177 at FAC level performance is superb enough. Best wishes and welcome aboard. Simon Edited February 20, 2013 by pianoman Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.