hideandshoot 13 Posted January 1, 2013 Report Share Posted January 1, 2013 Can anyone advise? I have a Deben Mk1 15ft locator (and collar), however, the collar doesn't appear to be working. I've been told it's the collar that's at fault but I'm not entirely sure. The receiver makes a noise when turned on inide the house (interference I guess), but it doesn't pick up the transmitter. Anyway, will the new Mk3 and Mk3M collars work with my old grey Mk1 box? If so, how accurate are they? If the receiver then turns out to be faulty (and not the collar) I will still be able to use the Mk3 collar with a new Mk3 reciever. Thanks Quote Link to post
tegater 789 Posted January 1, 2013 Report Share Posted January 1, 2013 As far as I know, mk1 collars will not work with mk3 box. Or, vice versa. Quote Link to post
hideandshoot 13 Posted January 1, 2013 Author Report Share Posted January 1, 2013 Thanks Tegater. But would a Mk3 collar work with a Mk1 box? Quote Link to post
willum 89 Posted January 1, 2013 Report Share Posted January 1, 2013 I have a mk 3 m collar n a mk 1 box they work together just a little out on depth but not alot Quote Link to post
hideandshoot 13 Posted January 1, 2013 Author Report Share Posted January 1, 2013 Thanks Willum. Roughly how far out is the accuracy? If it's only 6 inch out then that's not so bad. I presume it will still pin point the location (vertically), and that it's only the depth where the accuracy is lost? Quote Link to post
tegater 789 Posted January 1, 2013 Report Share Posted January 1, 2013 Thanks Tegater. But would a Mk3 collar work with a Mk1 box? I was under the impression they wouldn't, but that is obviously wrong. Thanks willum Quote Link to post
stinkers 102 Posted January 2, 2013 Report Share Posted January 2, 2013 My mk1 locator picks up my mk3 collar .....not sure about the depth readings being correct just know it does pick it up ok. Quote Link to post
Jamie m 668 Posted January 2, 2013 Report Share Posted January 2, 2013 Mk1 picks up mk3 and mk3m just fine , Quote Link to post
BrianSteven72 369 Posted January 2, 2013 Report Share Posted January 2, 2013 i use a mk 3m collar and locator and find the depth is never accurate its always way less than what it says it is ! The deeper it is The more un accurate it is if it reads 8 feet it will be 6 feet but if it reads 2 feet it will only be 1 foot but when you have used it a few times you get used to it and can guess it accurately so its not realy any problem Quote Link to post
busher01 5 Posted January 2, 2013 Report Share Posted January 2, 2013 Mark 1 boxes work with mark 3 collars but not other way around Atb busher Quote Link to post
Jamie m 668 Posted January 2, 2013 Report Share Posted January 2, 2013 If your not working flat ground it says deeper if on a bank or slope , Quote Link to post
Vermin control 234 0 Posted January 2, 2013 Report Share Posted January 2, 2013 I need another mk3 collar as I only have 1 but can't find anywhere that sells them, all the places and websites I look at just sell mk3m does anyone know a place?? Quote Link to post
stinkers 102 Posted January 2, 2013 Report Share Posted January 2, 2013 http://www.decoying.co.uk/?page=show-item&item=319 Quote Link to post
sam007 34 Posted January 2, 2013 Report Share Posted January 2, 2013 (edited) I need another mk3 collar as I only have 1 but can't find anywhere that sells them, all the places and websites I look at just sell mk3m does anyone know a place?? Deben have stopped making the MK3 collar but there is always plenty for sale on the forums or ebay. But make sure it is a MK3 not a MK2 it must be grey not black Sam Edited January 2, 2013 by sam007 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.