mesh board

[dommorris92 64]

Gonna start making some nets . . What size mesh board to go for ? Nets are gonna be about 4 ft

[The one 8,494]

I use two boards 2 inch and two and a eighth ,Start and finish the season with two inch nets so the smaller rabbits cant wriggle threw them then move on to two and a eighth meshed nets and you can neck the rabbits in the nets

[dommorris92 64]

Cheers pal !

[pie-eater 377]

I use 2 1/8 inch board which works well for me.

 

The One do your ferrets pass through the 2 inch mesh ok?

[The one 8,494]

Usually as i mostly work jills but my silvers sit inside the hole claw the net down them walk out ,dont know if there bright or stupid

[rabbitcatcher 1 287]

2 inch is my preference mate

[TOMO 26,484]

2 1/8 , and 2,1/4 for me,,,

[pie-eater 377]

Usually as i mostly work jills but my silvers sit inside the hole claw the net down them walk out ,dont know if there bright or stupid

 

I work jills and hobs. Couple of my jills are a fair size so not sure theyd go through a 4 inch mesh. Ive got a good working hob who has on one occasion been pursed up in a net.

[rabbitcatcher 1 287]

My border would get through a 4 inch mesh lol

[rabbitcatcher 1 287]

My border would get through a 4 inch mesh lol

 

 

All my ferrets get through a 2 inch mesh all be it the mk 3m collars do get snagged now and again

[The one 8,494]

'rabbitcatcher 1' timestamp='1355513258' post='2945052']

'rabbitcatcher 1' timestamp='1355513163' post='2945048']

My border would get through a 4 inch mesh lol

 

 

 

All my ferrets get through a 2 inch mesh all be it the mk 3m collars do get snagged now and again

 

Too modern for me im still using mk1's

[rabbitcatcher 1 287]

'rabbitcatcher 1' timestamp='1355513258' post='2945052']

'rabbitcatcher 1' timestamp='1355513163' post='2945048']

My border would get through a 4 inch mesh lol

 

 

 

All my ferrets get through a 2 inch mesh all be it the mk 3m collars do get snagged now and again

 

Too modern for me im still using mk1's

 

I've never used a mark 1, never even seen one being used, I started with the mark 3 and now wouldn't be without 1, atb rabbitcatcher 1

[pie-eater 377]

My border would get through a 4 inch mesh lol

 

I mean a mesh made on a 2 inch mesh board which is a 4 inch long mesh.