Jump to content

Tx200 into a FAC


Recommended Posts

Now lads i am thinking of uprateing my tx mark 3 to FAC and putting it on my ticket the question I have is which way, the gas ram or up rate the spring. I have been told that the tx is very strong gun and will cope very well with the power increse which is another question what will I likey to get from it bearing in mind once this is done it can never be put back to normal so it needs to be worth it.

Thanks

Link to post

Yer looks like that but don't what to know how just which kit my local gun shop will do the work stuff like that is a bit above me. Just sold my Daystate harr x2 FAC because I was sick of refilling and all that money just sat there for months at a time so think this could be a cheap option but if I am only going to get 16 to 20 then it's not worth knackin my tx

Link to post

Yes that's it but looking again the tx is not on that list so you may be right?? But they defo do the spring one on same site

Thanks for your help mate

 

yes it defo says air arms,but its for side levers,the TX is a under lever.

so yes probaly a spring route for you scott

Link to post

As Garfield's said, any thing above around 16 and they turn into a total dog to shoot. If you want FAC springer then look at the Diana side levers. There's none better. I had a 52 in .22 on ticket many moons ago that shot beautifully at 32 with no more recoil than most sub 12 springers. Highly recomended.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...