how to wrap a longnet up? help !

[Karl Daw 14]

To Pick a net up is not hard. Pull out your first end pin stretch the lines taught, if R/handed place your left hand down the stretched net about 18"

 

 

Then keeping the lines taught pull back with your left hand and go forward with you right hand and place the end pin under the lines 18" from your left hand.

 

 

holding the hank you have just made on the end pin with your R/hand just repeat until you have all the net on the end pin. It should then look like this.

 

 

You simply wrap the bare lines around the hank on the endpin and Bobs your uncle, one hanked up net ready to shoot again.

 

 

The system works on all size nets from short 5 yard nets on pegs to 50 yard nets on end pins.

 

 

Tiercel

 

Sorry to ask a stupid question when you are putting the line over the pins are you picking the net up together the top and bottom so the pin is going through the line and net or just the line?

Edited August 24, 2013 by Karl Daw

[The one 8,463]

Just the lines on the last mesh and dont be greedy as said a short armful plenty or you will be dragging the net on the ground as you pick it up

[Karl Daw 14]

Just the lines on the last mesh and dont be greedy as said a short armful plenty or you will be dragging the net on the ground as you pick it up

when you say the last mesh do you mean the top mesh mate?

[The one 8,463]

You have the net folded in half and the two drawcords are upper most , so it would be the top mesh

[Karl Daw 14]

You have the net folded in half and the two drawcords are upper most , so it would be the top mesh

thanks guys