mk 1 reciever problem

[saintsman54 15]

When I am using my box and scan to a deeper depth it gets to 6ft and then makes a screeching noise, does anyone know why this is? It has done it since I have had it ( given from a friend) so I don't know when or how it started. Any ideas? Cheers

[saintsman54 15]

I brought a different box off eBay and its doing exactly the same? Has anyone had similar problem? Or have any ideas as to the problem?

[ginger dave 63]

Does it happen will all of your collars?

[saintsman54 15]

Yes I have 2 mk1 and 1 mk3m, its really annoying, I just think it must be something I am doing if no one else has had it happen and both of my boxes have the same problem.

[robbo 859]

may need calibrating.

[The one 8,503]

It needs calibrating you can do it yourself theres a post on here or pm pipa

[Mick C. 229]

Mine screeches if i have it on full power when close to the collar it rights itself if i turn the power down or move the box to a higher position

[saintsman54 15]

Fixed now thanks the one I used the post explain how to re calibrate, saved a lot of stress and money

[The one 8,503]

='saintsman54' timestamp='1353432526' post='2909430']

Fixed now thanks the one I used the post explain how to re calibrate, saved a lot of stress and money

 

No problem its only two screws ?.

[lifelong cumbrian 1,826]

It needs calibrating you can do it yourself theres a post on here or pm pipa

 

Pipa sorted mine out.

[foxtails 272]

pipa sorted mine out aswel,

[saintsman54 15]

How much did it cost? I found it easy to do myself. Like the one said its only two screws and if it goes again I can fix it.