irishnut 297 Posted November 3, 2012 Report Share Posted November 3, 2012 they do CUSTOM knives, as long as your not looking custom made to your specs and designs. because its too much hard work. yeah whats that ment to mean ? do you actualy have the budget to commision something like that ? yes, i was expecting the cost to be around the £250-300 for each knife. when i asked a few on here and other places to make 2 knives to my design, i was told they didn't have time etc, it was excuses all over the place. p.s don't try to belittle me with questions on my finiancial credability, you mong Link to post Share on other sites
midnight 657 Posted November 3, 2012 Report Share Posted November 3, 2012 dont discredit me on my talent then !! what you asked for was beyond my ability at that time i was honest about it . looks like i was not the only one !!!!! £300 wont cover it either ask stuat mitchel to drop a weeks work for you, see what that costs because he is the only maker i know taking on that work type . mine arnt custom either there hand made / bench made /bladesmithed . i wonder if all the excuses where down to your attitude ? you seem to think your doing everyone a favor ......... Link to post Share on other sites
irishnut 297 Posted November 3, 2012 Report Share Posted November 3, 2012 dont discredit me on my talent then !! what you asked for was beyond my ability at that time i was honest about it . looks like i was not the only one !!!!! £300 wont cover it either ask stuat mitchel to drop a weeks work for you, see what that costs because he is the only maker i know taking on that work type . mine arnt custom either there hand made / bench made /bladesmithed . i wonder if all the excuses where down to your attitude ? you seem to think your doing everyone a favor ......... where did i discredit your talent? i didn't, why would i ask someone whom i thought had no talent to make something for me? i wouldn't. i'm not doing anyone a favour, i wanted 2 custom made knives for hunting use, i wanted to pay money for them. thats how business works. and as far as attitude goes, mine is just fine, i think asking a bladesmith to make a blade in a particular design is perfectly reasonable thing to do.# now thats over i think you need to pull your head out of your arse, your not the only person in the world who makes knives. neither is s.mitchell. just as a note to end, the 2 knives have been made, by a lad who specialises in making bushcraft knives, the metals used were changed after he did some better research on my behalf. Link to post Share on other sites
lksopener 105 Posted November 4, 2012 Report Share Posted November 4, 2012 Could you kindly post some pictures of these knifes If that's okay? What steel did you end up going with? Liam Link to post Share on other sites
irishnut 297 Posted November 4, 2012 Report Share Posted November 4, 2012 Only have 1 knife, the other was a present.for mates 50th. Mine is made from a high carbon stainless (think its called sd40- I'll check) . Mates was done in o1 tool due to his inaility to use a sharpener very well. Micarta handles are sweet Link to post Share on other sites
lksopener 105 Posted November 4, 2012 Report Share Posted November 4, 2012 Cheers Irishnut would you stick a picture up? Micarta doesn't seem a glamorous handle choice for such a high end custom mind? Wouldn't you have gone for something really high end, burl wood or something really ornate? Looking forward to seeing it! Link to post Share on other sites
paulus 26 Posted November 4, 2012 Report Share Posted November 4, 2012 Only have 1 knife, the other was a present.for mates 50th. Mine is made from a high carbon stainless (think its called sd40- I'll check) . Mates was done in o1 tool due to his inaility to use a sharpener very well. Micarta handles are sweet ferralium alloy 255/sd40 perhaps Link to post Share on other sites
paulus 26 Posted November 4, 2012 Report Share Posted November 4, 2012 or 440 surgical grade stainless Link to post Share on other sites
irishnut 297 Posted November 4, 2012 Report Share Posted November 4, 2012 He says its called cts40, just texted him. Reason for micarta is because I use the knife all the time, its in dishwasher now. And I like it better. Just need to get sheath fixed, it just don't sit right on me. I'll throw few pics up soon. Link to post Share on other sites
lksopener 105 Posted November 4, 2012 Report Share Posted November 4, 2012 Good stuff looking forward to the pictures, who is the maker? Link to post Share on other sites
Gin 498 Posted November 4, 2012 Report Share Posted November 4, 2012 http://www.cartech.com/techarticles.aspx?id=3940 Link to post Share on other sites
Gin 498 Posted November 4, 2012 Report Share Posted November 4, 2012 I think your mate with the o1 tool steel blade got the better knife, going from the tech info sheet Link to post Share on other sites
midnight 657 Posted November 5, 2012 Report Share Posted November 5, 2012 dont discredit me on my talent then !! what you asked for was beyond my ability at that time i was honest about it . looks like i was not the only one !!!!! £300 wont cover it either ask stuat mitchel to drop a weeks work for you, see what that costs because he is the only maker i know taking on that work type . mine arnt custom either there hand made / bench made /bladesmithed . i wonder if all the excuses where down to your attitude ? you seem to think your doing everyone a favor ......... where did i discredit your talent? i didn't, why would i ask someone whom i thought had no talent to make something for me? i wouldn't. i'm not doing anyone a favour, i wanted 2 custom made knives for hunting use, i wanted to pay money for them. thats how business works. and as far as attitude goes, mine is just fine, i think asking a bladesmith to make a blade in a particular design is perfectly reasonable thing to do.# now thats over i think you need to pull your head out of your arse, your not the only person in the world who makes knives. neither is s.mitchell. just as a note to end, the 2 knives have been made, by a lad who specialises in making bushcraft knives, the metals used were changed after he did some better research on my behalf. yeah the best thing to do is ask a bladsmith to make a stock removal knife !! as for thinking im the only one your off your head mate im well aware there is many makers world wide custom, bench and smithed , hobby ,preffesional etc . we did suggest you try them all until you where happy . good job you used someone that just makes bushcraft knives there some technical stuff . im glad your happy with it and someone did the job for you . well done if i wanted the work i would have taken it . the beauty of what i do (although i forget it sometimes) is the freedom i have i can make what i want from what i want when i want to , or not .... and the choice to take on work for people to . if the job dont get taken there must be a reason for it . i love how you come across . its awsome . looking forward to seeing this knife to that can handle dishwasher cleaning regularly .. i hope the scale bond is not apoxied , because apoxi has two enimys and one is heat , if i wanted to break down an apoxi bond i think i would use hot salty and detergant laden water to do it !! just a thought . Link to post Share on other sites
AUTINE 1 Posted November 5, 2012 Report Share Posted November 5, 2012 Does anyone make any decent hunting knifes? If so who and what peices? Cheers ryan Hy, i`m in to knifes making, if yo haw some interest you can check ot this post or see more pictures of my work in this facebook page: http://www.(!64.56:886/autinetools Link to post Share on other sites
irishnut 297 Posted November 5, 2012 Report Share Posted November 5, 2012 The metals used in my knives have been test by many people using their knives. Has anyone actually really tested midnights knives, to say if their great or crap. They look the part, but can they handle the work. Stock removal is great method of making knives, as you should know! The really important aspect is metal quality and hardening process. I don't want a knife to just look pretty it has to work. As for epoxy, their is obviously more types out there than you know off mr midnight. But I didn't want permanent scales, so no worries there Link to post Share on other sites
Recommended Posts