porkybella 284 Posted October 28, 2012 Report Share Posted October 28, 2012 Hi does anyone no were i can get this done my ultra has a wee bit of rust on it i want it looking brand new cheers porky Quote Link to post
AirgunGuy 362 Posted October 28, 2012 Report Share Posted October 28, 2012 If it's only a couple of very small areas, try scraping it with your finger nail and then rub it with a soft cloth with some oil on it. Could save you 100 or so quid Quote Link to post
Tron 173 Posted October 29, 2012 Report Share Posted October 29, 2012 You will find rebluing can be a very expensive repair. Try to get a quote from companies who carry out metal finishing services. you will find that a "parkerised" finish is good on steel components, anodising and other treatments are available the same as the original ones on the alloy parts, ie, breech assemblies, loading bolts.etc, Quote Link to post
Mawders 595 Posted October 29, 2012 Report Share Posted October 29, 2012 Somebody on here a while back and I can't remember who it was now, may have been phantom suggested rubbing the barrel down lightly in the areas of slight pitting or rusting with tinfoil then rubbing the area with an oiled cloth. My only question is what is the best oil to rub the area with? Oil has so many different types. I want to try this method on an old mk2 tx200 I have which has some pitting in places on the barrel where it was stored in its gun bag for 10 years without use. Quote Link to post
kill zone 27 Posted October 29, 2012 Report Share Posted October 29, 2012 manchester airguns ask for colin i think its around £60 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.