Jump to content

Builders - More Questions About New Kennel Block!


Recommended Posts

try and keep your drainmage pipe as straight as possible gareth, with as little bends and prefereably no corners in it until either the exit into the mains or at the very start, it will only slow the flow of solids and possibly cause you blockages in the long term. When you tap into the main sewer, try and configure it that the material running down your pipes enter the seawer pipes running with the flow ie the sit hits the flow of the sewers in the same direction lol.

 

Am looking forward to seeing your finished set up, nice to see someone goung about things with a bit of planning and thought.

 

One word of advice, if theres a certain product you need and can afford, and it will sort of do the job, or a product that will be a "one job and its done" sort of thing but its more expensive, and you cant quite afford it, save up a couple of weeks and get the better one, in a while you'll be glad you did,i.e with the roofing sheets.

 

All the best

 

Ok thanks for the advise mate. Appreciate that.

 

I don't actually plan to put solids down there but I will take your advise regardless.

 

Cheers

 

Gaz

try and keep your drainmage pipe as straight as possible gareth, with as little bends and prefereably no corners in it until either the exit into the mains or at the very start, it will only slow the flow of solids and possibly cause you blockages in the long term. When you tap into the main sewer, try and configure it that the material running down your pipes enter the seawer pipes running with the flow ie the sit hits the flow of the sewers in the same direction lol.

 

Am looking forward to seeing your finished set up, nice to see someone goung about things with a bit of planning and thought.

 

One word of advice, if theres a certain product you need and can afford, and it will sort of do the job, or a product that will be a "one job and its done" sort of thing but its more expensive, and you cant quite afford it, save up a couple of weeks and get the better one, in a while you'll be glad you did,i.e with the roofing sheets.

 

All the best

 

Ok thanks for the advise mate. Appreciate that.

 

I don't actually plan to put solids down there but I will take your advise regardless.

 

Cheers

 

Gaz

 

No point in going to all the trouble if your not going to put dog shite down it :no:

 

Why would you wanna put shit down it mate? It would take longer to move it to the drain than it would to pick it up surely? My dogs only shit in the runs maybe 3 times a week. They wait until they go for a walk usually.

 

Gaz

Link to post
Share on other sites

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

4" block work pointed right then painted will be fine no need to render. And there are loads of single skin garage's.

It might take more than a day, as there is a limit to how high they can build in one day, as the weight of the bricks pushes out the wet cement at the bottom. Again get a builder to give you a price.

OK

Well i think you are going to a lot of trouble just for rain water, I just built a run with acco drain in it to the main drain, and all the shit a piss is going down it :yes:

That must be messy,Getting shit through an aco grid.

 

No you leave the end open shovel the shite up put down and and swill out

Link to post
Share on other sites

Well i think you are going to a lot of trouble just for rain water, I just built a run with acco drain in it to the main drain, and all the shit a piss is going down it :yes:

That must be messy,Getting shit through an aco grid.

 

No you leave the end open shovel the shite up put down and and swill out

Iwas jokeing i do the same.
Link to post
Share on other sites

Well i think you are going to a lot of trouble just for rain water, I just built a run with acco drain in it to the main drain, and all the shit a piss is going down it :yes:

That must be messy,Getting shit through an aco grid.

 

No you leave the end open shovel the shite up put down and and swill out

Iwas jokeing i do the same.

 

Its not finish yet i will prob cut a piece about 12" that i can lift up. Just seems daft to me connecting into the main drain and not making use of it :yes:

  • Like 1
Link to post
Share on other sites

only prob with aco is dogs that loose hair blocks them up and soon bulids up power wash reg :thumbs:

or if your from the Barnsley/Sheffield/ Rotherhamshire area its

presherwesher :whistling::thumbs:

 

 

What's a fecking presherwesher is that the same as a presherwasher???? think talking the piss that back fired

i think it was a jest to stabba if thats ok :thumbs:

Link to post
Share on other sites

only prob with aco is dogs that loose hair blocks them up and soon bulids up power wash reg :thumbs:

or if your from the Barnsley/Sheffield/ Rotherhamshire area its

presherwesher :whistling::thumbs:

 

 

Dont take the piss out of my mate stabba

i think it was a jest to stabba if thats ok :thumbs:

 

 

OK

  • Like 2
Link to post
Share on other sites

only prob with aco is dogs that loose hair blocks them up and soon bulids up power wash reg :thumbs:

or if your from the Barnsley/Sheffield/ Rotherhamshire area its

presherwesher :whistling::thumbs:

 

 

Dont take the piss out of my mate stabba

i think it was a jest to stabba if thats ok :thumbs:

 

 

OK

Was a yorkshire joke christine..now piss off theres a good chap :laugh: :laugh: :laugh:
  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...