Jump to content

every week at my forge and workshop(updated)


Recommended Posts


  • Replies 985
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

ok guys busy week here for me again . lst week mas production this week finnished knives of a slightly higher calibre ! first job of the week socks sent this knife for a refurb . bit of elbow g

Great work Matt, and knives that will last a lifetime with care. Remember lads this is Matts living, not a hobby. Try not to knock him down on price, the knives / blades are worth every penny, and m

boar knife not a true "how to" but just a little write up following the construction of a knife from a file to a "boar knife" i had a similar knife planned but after a pm from a hunting life member

Posted Images

  • 4 weeks later...

Hi guys , sorry iv not had Internet for about 8 weeks !!

 

I need your help guys , through loads of reasons and events iv got to stop making the knives .

Fieldcrafter-uk will be closed up once all my stock is sold .

 

Iv got a lot of blanks if like to see sold ASAP .

 

Basically after 3 and a bit years of struggling its time to admit defeat !!

 

Iv gotta get a job and get on with my life !

Loads if shit over the last 4 months has lead to this and it's not really anything I can undo ..

So if you can find the dosh and help by buying up what I have that will be great !!

 

I may make some knives in the future but only now and then and maybe my own Damascus as I don't want to forget that's what bought me here in the first place !!

 

 

Iv got lots of blanks like I said .

Il start to grind and polish them up and get them on here for you guys.

I'm going to handle a good few to so there will be knives with sheaths to Finnish the job off !!

 

I'd like to see the thread come alive again with your input and support because in all honesty it's you guys that have always looked after me best !!

 

It's a few private issues and some not so private that are leading to this , my health to if I'm honest the grinding dust is just killing me !!

 

If you look on the miscellaneous for sale section there should be a thread with some of the new blanks for sale !!

 

In gonna Finnish some off in different ways to just to have choice .

 

Thanks fellas , if you can help me out this one last time it would be great, and I will do my best to help on prices !!

Link to post
Share on other sites
  • 2 weeks later...
  • 3 weeks later...

thanks gents .

well here we go then the last (bar one) official fieldcrafter-uk finnished knives .

i still have blanks and i will try to do a few more finnished knives before new year but this is the last of the logoed blades .

all bar one finnished in corian , il give 10% discount on them which means you get the knife and sheath with free postage and covers any fees.

£108 each as i need them sold im £720 behind on rent !!

 

 

image_zpsb6fa300e.jpg

 

 

 

this is the white stone effect corian .

image_zps98a12782.jpg

image_zps09011750.jpg

 

black stone effect corian

image_zps93c09e21.jpg

image_zps6df46a81.jpg

 

black corian

image_zps76ccc65c.jpg

image_zpsb54a1eb8.jpg

 

and the last micarta

image_zps68a4c39f.jpg

 

 

as you can see i only do black sheaths and have one left hander for this lot , cant make any more as i dont have the leather !!

image_zps9da7b830.jpg

 

 

i have this one little one finnished currently in white stone effect corian at £65 i have two left hand sheaths and one right for this one and will try to fill the spare sheahs this week .

image_zpsdf292e79.jpg

image_zps1c4eb141.jpg

image_zpsdecfeba4.jpg

 

 

 

ok a few rules , this is a closing down sale !!

i cant hold on to anything for any one i need the money , they already have discount on them .

who pays first gets the knife .

i have almost no materials now so cant say il make you one up like i used to !

 

and i have them advertised everywhere so i hope they will sell fast !

please dont be hostile if you miss out !

everything goes with firstclass recorded delivery so will be with you usual the next day , and i can track them if thats not the case .

 

 

 

 

next bit to say is i have loads o blanks still but no 4mm pins , i do have lanyard so if you buy a blank you get that but you will need to go to B&Q to get yourself the pins .

iv knocked £2 off the price to sweeten that blow .

 

so we have blanks with out logos in a satin finnish with lanyard tube, post included for £25 on the small and £35 on the big

 

i can do you a template of the sheath if you like so you can make your own sheath at some stage !!

 

 

i hope its all clear and you guys and i can help each other out so im not homless for new year :)

 

 

all the best , matt

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By GruffaloGriff
      This is one my son has had on the go for a while. The wrought iron is a piece i pulled out of a skip, just thought it was mild steel rod, only realized when it was being forged into a pair of tongs. The tongs got abandoned and the wrought iron put to a better use. The blade is leaf spring from a series 2 landy.
      P1100998 by Terry Griffiths, on Flickr">P1100999 by Terry Griffiths, on Flickr">P1110001 by Terry Griffiths, on Flickr">
      Now Complete.
      Blade: Spring steel with satin finish and domed mirror polished spine. Length five and a half inches (145mm), width one and a half inches (38mm), thickness 3/16 (5mm).
      Handle: Utile handle scales on wrought iron frame with copper pins. Wrought iron fittings with copper spacers. Take down construction.
      P1110093 by Terry Griffiths, on Flickr">P1110099 by Terry Griffiths, on Flickr">P1110077 by Terry Griffiths, on Flickr">P1110078 by Terry Griffiths, on Flickr">P1110081 by Terry Griffiths, on Flickr">P1110082 by Terry Griffiths, on Flickr">P1110084 by Terry Griffiths, on Flickr">P1110085 by Terry Griffiths, on Flickr">P1110087 by Terry Griffiths, on Flickr">P1110090 by Terry Griffiths, on Flickr">P1110092 by Terry Griffiths, on Flickr">P1110094 by Terry Griffiths, on Flickr">P1110095 by Terry Griffiths, on Flickr">
    • By GruffaloGriff
      Recently finished this knife. I made it for a "knife in the hat" draw over on EM forum. 
      The style is Kiridashi so ground on one side only with the other flat like a chisel. Ideal for cutting leather or anything else where you would run the blade along a straight edge.
      [url=https://flic.kr/p/2kUct23][img]https://live.staticflickr.com/65535/51130166048_b5602b54f1_b.jpg[/img][/url][url=https://flic.kr/p/2kUct23]P1100987[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kUh6oA][img]https://live.staticflickr.com/65535/51131068850_a16637af01_b.jpg[/img][/url][url=https://flic.kr/p/2kUh6oA]P1100984[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kUbK34][img]https://live.staticflickr.com/65535/51130024819_a4fbe08087_b.jpg[/img][/url][url=https://flic.kr/p/2kUbK34]P1100990[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTrBjU][img]https://live.staticflickr.com/65535/51121609068_eb288c86f1_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBjU]P1100966[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTqLFC][img]https://live.staticflickr.com/65535/51121445434_5bd9c6806b_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLFC]P1100967[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTpafH][img]https://live.staticflickr.com/65535/51121131137_08baea8c3e_b.jpg[/img][/url][url=https://flic.kr/p/2kTpafH]P1100970[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTqLCr][img]https://live.staticflickr.com/65535/51121445249_39f4e8b177_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLCr]P1100971[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTqLAN][img]https://live.staticflickr.com/65535/51121445154_06c5c52abb_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLAN]P1100972[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTrBcK][img]https://live.staticflickr.com/65535/51121608653_cffd15b626_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBcK]P1100973[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTs5GT][img]https://live.staticflickr.com/65535/51121701171_4d40de442f_b.jpg[/img][/url][url=https://flic.kr/p/2kTs5GT]P1100974[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTrBa5][img]https://live.staticflickr.com/65535/51121608498_d007bc1e0d_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBa5]P1100976[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kMHVfX][img]https://live.staticflickr.com/65535/51056892207_85801fcab1_b.jpg[/img][/url][url=https://flic.kr/p/2kMHVfX]P1100912[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kN29jo][img]https://live.staticflickr.com/65535/51060253042_3cf9b1c874_b.jpg[/img][/url][url=https://flic.kr/p/2kN29jo]P1100921[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr








    • By GruffaloGriff
      This blade is made from motorbike chain hand forged on to a leaf spring core. I have experimented a few times with chain Damascus but this is the cleanest weld yet, not perfect but it has character. Very hard to eliminate all the voids in the chain beating it by hand...even though i spent probably half a day hammering away on it.... I will make a press one day.
      I had a smaller knife in mind when i started out but wanted to maximize the lump of rough forged "Damascus" I ended up with so it determined the size & shape of the final blank.
      The blade is 7.5 inches and handle  approx 4.5 so overall something like a 12" Knife.
      Handle is Scottish red stag and the bolster/ pommel are stacked brass & copper soldered together.
       
      P1100805 by Terry Griffiths, on Flickr">

      P1100849 by Terry Griffiths, on Flickr">P1100855 by Terry Griffiths, on Flickr">P1100847 by Terry Griffiths, on Flickr">P1100846 by Terry Griffiths, on Flickr">P1100853 by Terry Griffiths, on Flickr">P1100851 by Terry Griffiths, on Flickr">P1100845 by Terry Griffiths, on Flickr">P1100836 by Terry Griffiths, on Flickr">P1100844 by Terry Griffiths, on Flickr">P1100826 by Terry Griffiths, on Flickr">P1100823 by Terry Griffiths, on Flickr">
      P1100807 by Terry Griffiths, on Flickr">
    • By riohog
      kitchen knives and steak  knives   from bohler n690  and AEB-L stainless     red g10 handles with stainless pins 

    • By GruffaloGriff
      Heard a while back mention of sharpening with MDF wheels but never really paid much attention. I recently thought i would give it a go and turned up a quick MDF wheel on the face-plate of my wood-working lathe. I clamped a makeshift guide to the back of the lathe and worked with the wheel turning away from me. I was blown away by the results! Super sharp paper slicey edge straight off the wheel.
       
      Decided a dedicated MDF wheel sharpener was high on the list of must haves so started gathering bits. I was lucky enough to pick up an old 8" Makita bench grinder on ebay for £25. Everything else is made from scrap bits so that was all the outlay for the build.
       
      I took the guards off the grinder, swapped the switch and the power cable around so the on/off switch is effectively now on the back so the grinder can be operated with the wheels running away from you.
       
      The knife clamp is made from an old door hinge welded to a bit of rod off of some other power tool, hence the nice grippy knob on the end. A 6mm hex bolt through the hinge clamps the knife in place. A cutting of hex bar slides up and down to alter the angle of grind and locks in place with another allan bolt.
       
      Once set up to the desired angle the blade can be sharpened on both sides and both wheels quickly without altering anything.
       
      The MDF wheels are loaded with grey polishing compound and jewelers rouge respectively.
       
      P1100602 by Terry Griffiths, on Flickr">P1100612 by Terry Griffiths, on Flickr">P1100604 by Terry Griffiths, on Flickr">P1100605 by Terry Griffiths, on Flickr">P1100606 by Terry Griffiths, on Flickr">P1100608 by Terry Griffiths, on Flickr">P1100610 by Terry Griffiths, on Flickr">P1100611 by Terry Griffiths, on Flickr">

×
×
  • Create New...