Jump to content

every week at my forge and workshop(updated)


Recommended Posts

edit ,all finnished knives now sold .

 

there are still some of the blanks , couple of key tangs and 3 bigger ones i think .

make nice gifts to anyone with some basic tools that wants a usable knife for xmass . you only need a few brass pins some suitable handle material and the elbow grease !!

Link to post
Share on other sites

  • Replies 985
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

ok guys busy week here for me again . lst week mas production this week finnished knives of a slightly higher calibre ! first job of the week socks sent this knife for a refurb . bit of elbow g

Great work Matt, and knives that will last a lifetime with care. Remember lads this is Matts living, not a hobby. Try not to knock him down on price, the knives / blades are worth every penny, and m

boar knife not a true "how to" but just a little write up following the construction of a knife from a file to a "boar knife" i had a similar knife planned but after a pm from a hunting life member

Posted Images

bargin alert.

 

 

 

2012_1210stuff0007.jpg2012_1210stuff0006.jpg

6 key tang blades you can see the size next to a standard lighter !

leagl carry knives once compleated , somthing for the wanders among you that need to keep right with plod .

£10 each or 2x for £15 they will ne posted first class recorded to you , they will be there in plenty of time for xmass .

they have 120 grit grinds and raw quench finnish on the flats , you dont need to worry about scratching them . laser cut originaly from o1 tools steel 4.5mm thick , good solid heat treat and temper on them , and easy to sharpen on whet stones/oil stones . simply drill a peice of stage/ wood / bone / what ever and glue in quick simply working knife !!

all the above are now sold thanks gent

 

 

4 laser cut blanks , 2x forrest and feild (last 2 ever) and 2x feild crafters (only 10 left of these)

all have ascandi grinds 120 grit finnish on the edge and raw quench finnish on the flats , again good solid heat treat and temper , made from 4.5mm o1 (forrest and feild) 5.5mm o1 (feildcrafters)

£20 each posted first class recorded to you in time for xmass

just the bigger two blanks now available

2012_1210stuff0009.jpg2012_1210stuff0008.jpg2012_1210stuff0011.jpg

 

 

there will be a few more ods amd sods plus a few more finnished knives to any day now .

Link to post
Share on other sites

just finnished this one , its been part finnished for months .

its a big knife a nice knife to . you can see from the pics the size of it , has a satin finnish red linen micarta (bit unusual) double lanyard front and back , with a false edge but not sharp .

big old english leather sheath with generouse belt loop .

£80 posted first class recorded (be there in time for xmass ) you can pay extra and i will go for next day delivery to make sure .

2012_1213jkjherjkgf0022.jpg

2012_1213jkjherjkgf0023.jpg

2012_1213jkjherjkgf0024.jpg

2012_1213jkjherjkgf0026.jpg

2012_1213jkjherjkgf0027.jpg

2012_1213jkjherjkgf0029.jpg

2012_1213jkjherjkgf0031.jpg

  • Like 3
Link to post
Share on other sites

glad they got there steve should keep you busy .

 

2 more finnished today .

both damascus with burl wood . both burl woods are very hard to come by in knife handles.

 

first one safety knife/ pauncher/utility knife has "explosion pattern" cutting edge and straight laminate spine. forged from w2 file steel and high carbon nickel steel , with burl/curly birch buffalo horn and brass hanldel . wet formed sheath belt loop style .

this one could be a gift for your son daughter as its low risk of stab injury , although i sliced my thumb with it ha ha . £55 posted first class recorded

2012_1213jkjherjkgf0002.jpg2012_1213jkjherjkgf0003.jpg2012_1213jkjherjkgf0007.jpg2012_1213jkjherjkgf0009.jpg

 

 

next up burl damascus and burl oak , with buffal horn and brass handle , english leathe sheath belt loop style .

the pattern is really hard to do and can leave marks from the hammer blows that diverlope it , there not faults as they would be with other patterns they are very much part of the blade and pose no risk at all .

i personaly love this knife it feels very refined . £95 posted first class recorded .

2012_1213jkjherjkgf0015.jpg2012_1213jkjherjkgf0011.jpg2012_1213jkjherjkgf0012.jpg2012_1213jkjherjkgf0013.jpg2012_1213jkjherjkgf0014.jpg2012_1213jkjherjkgf0016.jpg2012_1213jkjherjkgf0019.jpg

  • Like 2
Link to post
Share on other sites

Recieved the white micarta for the missus today

 

All I can say is ,, stunning, what an absolutely beautiful knife,, weighty, and welll balanced, outstanding.

 

Thanks Matt, she loves it, an the handle fits her hands perfectly

ive now got 2 of these and carnt sing there praises highly enough :thumbs:
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By GruffaloGriff
      This is one my son has had on the go for a while. The wrought iron is a piece i pulled out of a skip, just thought it was mild steel rod, only realized when it was being forged into a pair of tongs. The tongs got abandoned and the wrought iron put to a better use. The blade is leaf spring from a series 2 landy.
      P1100998 by Terry Griffiths, on Flickr">P1100999 by Terry Griffiths, on Flickr">P1110001 by Terry Griffiths, on Flickr">
      Now Complete.
      Blade: Spring steel with satin finish and domed mirror polished spine. Length five and a half inches (145mm), width one and a half inches (38mm), thickness 3/16 (5mm).
      Handle: Utile handle scales on wrought iron frame with copper pins. Wrought iron fittings with copper spacers. Take down construction.
      P1110093 by Terry Griffiths, on Flickr">P1110099 by Terry Griffiths, on Flickr">P1110077 by Terry Griffiths, on Flickr">P1110078 by Terry Griffiths, on Flickr">P1110081 by Terry Griffiths, on Flickr">P1110082 by Terry Griffiths, on Flickr">P1110084 by Terry Griffiths, on Flickr">P1110085 by Terry Griffiths, on Flickr">P1110087 by Terry Griffiths, on Flickr">P1110090 by Terry Griffiths, on Flickr">P1110092 by Terry Griffiths, on Flickr">P1110094 by Terry Griffiths, on Flickr">P1110095 by Terry Griffiths, on Flickr">
    • By GruffaloGriff
      Recently finished this knife. I made it for a "knife in the hat" draw over on EM forum. 
      The style is Kiridashi so ground on one side only with the other flat like a chisel. Ideal for cutting leather or anything else where you would run the blade along a straight edge.
      [url=https://flic.kr/p/2kUct23][img]https://live.staticflickr.com/65535/51130166048_b5602b54f1_b.jpg[/img][/url][url=https://flic.kr/p/2kUct23]P1100987[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kUh6oA][img]https://live.staticflickr.com/65535/51131068850_a16637af01_b.jpg[/img][/url][url=https://flic.kr/p/2kUh6oA]P1100984[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kUbK34][img]https://live.staticflickr.com/65535/51130024819_a4fbe08087_b.jpg[/img][/url][url=https://flic.kr/p/2kUbK34]P1100990[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTrBjU][img]https://live.staticflickr.com/65535/51121609068_eb288c86f1_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBjU]P1100966[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTqLFC][img]https://live.staticflickr.com/65535/51121445434_5bd9c6806b_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLFC]P1100967[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTpafH][img]https://live.staticflickr.com/65535/51121131137_08baea8c3e_b.jpg[/img][/url][url=https://flic.kr/p/2kTpafH]P1100970[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTqLCr][img]https://live.staticflickr.com/65535/51121445249_39f4e8b177_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLCr]P1100971[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTqLAN][img]https://live.staticflickr.com/65535/51121445154_06c5c52abb_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLAN]P1100972[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTrBcK][img]https://live.staticflickr.com/65535/51121608653_cffd15b626_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBcK]P1100973[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTs5GT][img]https://live.staticflickr.com/65535/51121701171_4d40de442f_b.jpg[/img][/url][url=https://flic.kr/p/2kTs5GT]P1100974[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTrBa5][img]https://live.staticflickr.com/65535/51121608498_d007bc1e0d_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBa5]P1100976[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kMHVfX][img]https://live.staticflickr.com/65535/51056892207_85801fcab1_b.jpg[/img][/url][url=https://flic.kr/p/2kMHVfX]P1100912[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kN29jo][img]https://live.staticflickr.com/65535/51060253042_3cf9b1c874_b.jpg[/img][/url][url=https://flic.kr/p/2kN29jo]P1100921[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr








    • By GruffaloGriff
      This blade is made from motorbike chain hand forged on to a leaf spring core. I have experimented a few times with chain Damascus but this is the cleanest weld yet, not perfect but it has character. Very hard to eliminate all the voids in the chain beating it by hand...even though i spent probably half a day hammering away on it.... I will make a press one day.
      I had a smaller knife in mind when i started out but wanted to maximize the lump of rough forged "Damascus" I ended up with so it determined the size & shape of the final blank.
      The blade is 7.5 inches and handle  approx 4.5 so overall something like a 12" Knife.
      Handle is Scottish red stag and the bolster/ pommel are stacked brass & copper soldered together.
       
      P1100805 by Terry Griffiths, on Flickr">

      P1100849 by Terry Griffiths, on Flickr">P1100855 by Terry Griffiths, on Flickr">P1100847 by Terry Griffiths, on Flickr">P1100846 by Terry Griffiths, on Flickr">P1100853 by Terry Griffiths, on Flickr">P1100851 by Terry Griffiths, on Flickr">P1100845 by Terry Griffiths, on Flickr">P1100836 by Terry Griffiths, on Flickr">P1100844 by Terry Griffiths, on Flickr">P1100826 by Terry Griffiths, on Flickr">P1100823 by Terry Griffiths, on Flickr">
      P1100807 by Terry Griffiths, on Flickr">
    • By riohog
      kitchen knives and steak  knives   from bohler n690  and AEB-L stainless     red g10 handles with stainless pins 

    • By GruffaloGriff
      Heard a while back mention of sharpening with MDF wheels but never really paid much attention. I recently thought i would give it a go and turned up a quick MDF wheel on the face-plate of my wood-working lathe. I clamped a makeshift guide to the back of the lathe and worked with the wheel turning away from me. I was blown away by the results! Super sharp paper slicey edge straight off the wheel.
       
      Decided a dedicated MDF wheel sharpener was high on the list of must haves so started gathering bits. I was lucky enough to pick up an old 8" Makita bench grinder on ebay for £25. Everything else is made from scrap bits so that was all the outlay for the build.
       
      I took the guards off the grinder, swapped the switch and the power cable around so the on/off switch is effectively now on the back so the grinder can be operated with the wheels running away from you.
       
      The knife clamp is made from an old door hinge welded to a bit of rod off of some other power tool, hence the nice grippy knob on the end. A 6mm hex bolt through the hinge clamps the knife in place. A cutting of hex bar slides up and down to alter the angle of grind and locks in place with another allan bolt.
       
      Once set up to the desired angle the blade can be sharpened on both sides and both wheels quickly without altering anything.
       
      The MDF wheels are loaded with grey polishing compound and jewelers rouge respectively.
       
      P1100602 by Terry Griffiths, on Flickr">P1100612 by Terry Griffiths, on Flickr">P1100604 by Terry Griffiths, on Flickr">P1100605 by Terry Griffiths, on Flickr">P1100606 by Terry Griffiths, on Flickr">P1100608 by Terry Griffiths, on Flickr">P1100610 by Terry Griffiths, on Flickr">P1100611 by Terry Griffiths, on Flickr">

×
×
  • Create New...