Jump to content

every week at my forge and workshop(updated)


Recommended Posts


  • Replies 985
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

ok guys busy week here for me again . lst week mas production this week finnished knives of a slightly higher calibre ! first job of the week socks sent this knife for a refurb . bit of elbow g

Great work Matt, and knives that will last a lifetime with care. Remember lads this is Matts living, not a hobby. Try not to knock him down on price, the knives / blades are worth every penny, and m

boar knife not a true "how to" but just a little write up following the construction of a knife from a file to a "boar knife" i had a similar knife planned but after a pm from a hunting life member

Posted Images

 

bargin alert.

 

 

6 key tang blades (only bottom right 2 left now). you can see the size next to a standard lighter !

leagl carry knives once compleated , somthing for the wanders among you that need to keep right with plod .

£10 each or 2x for £15 they will ne posted first class recorded to you , they will be there in plenty of time for xmass .

they have 120 grit grinds and raw quench finnish on the flats , you dont need to worry about scratching them . laser cut originaly from o1 tools steel 4.5mm thick , good solid heat treat and temper on them , and easy to sharpen on whet stones/oil stones . simply drill a peice of stage/ wood / bone / what ever and glue in quick simply working knife !!

bottom two left are sold to tyla top two sold the steve .

 

 

4 laser cut blanks , 2x forrest and feild (last 2 ever) and 2x feild crafters (only 10 left of these)

all have ascandi grinds 120 grit finnish on the edge and raw quench finnish on the flats , again good solid heat treat and temper , made from 4.5mm o1 (forrest and feild) 5.5mm o1 (feildcrafters)

£20 each posted first class recorded to you in time for xmass

2012_1210stuff0011.jpg

 

 

there will be a few more ods amd sods plus a few more finnished knives to any day now .

 

God I'm tempted by one of those blanks on the right (field crafters?), especially the one with the false edge. Are they all done ready for handling at £20 Matt? If you're moving on to other things I might have to grab one for a bit of a project ln the future?

Link to post
Share on other sites

I can't say no then really can I? LOL

 

I'm not sure which I would prefer mind, normal or false edge...... so probably just come and have a look at both if that's alright?

 

Had I better come tonight or will they still be one of each about tomorrow/wednesday night?

Link to post
Share on other sites

i duno ben mate , im not palnning any more before xmass now so if they go the go .

you can allways paypal and il post mate ?

 

I haven't got paypal account mate and can't really be fecked setting one up tbh. I'll let you know when I'll be in the area this week.

Link to post
Share on other sites

Just a point though

 

The small blades are not legal carry. Fixed blade so not legal

Blade must be folding, non locking and less than 3" to be UK legal.

 

Bloody pretty little things though. I`m literally drooling waiting on the wifes knife arriving

Link to post
Share on other sites

Sorry no

 

I am an absolute geek on every day carry law, because I carry a knife every day,,everywhere.

 

EDC,, (every day carry, i.e UK legal) knifes are slipjoints with a blade length along the cutting edge of 3" or less. Slipjoint means folding non locking.

 

ANY fixed blade knife is not included in this and are not EDC. regardless off size.

 

Just in case anyone was thinking about carrying one, and ended up in hot water. I thought this should be pointed out.

 

If you have good reason, you can carry anything you like,. Hunting is good reason to carry a hunting knife.

Link to post
Share on other sites

well there you go .

dont buy one and carry it then gents !!

this is what i love about knife making all the bullshit , sorry for miss leading anyone i was incorrect .

funny iv been stabbed 3 seperate times and had my face slashed once .

i dont carry a knife and dont worry if others do but as a victim of knife crime the laws are ther to protect me , not done it yet ha ha weapons of choice have been a stanely knife a swiss army knife broken bottle and unknown bladed weapon on my face , most of those are well under 3" crackers int it ?

im happy to get my scares out :) girls like scars ha :)

Link to post
Share on other sites

in france they are way more relaxed im told by a friend collector, at the paris knife show the range of knives and standard is beyond beleaf and everyone carries a knife but not a weapons etc as tools they are , even an old grandma will pull out a knife from her pocket and cut up an apple and eat it in public nobody bats an eye lid !! yet im sure knife crime is as rife there as anywhere .

i have a wakisashi im making its a direct 16th centuary copy and im told im breaking the law when i heat treat it and it becomes live blade unless its for demonstraightion of original skills , so i need a side blown charcoal forge with bellows (hand operated) and the correct pottery clay to legaly finnish it .

how the hell is that a law ? who thinks this shit up ????

 

it must be a rise in chaves with "samuri sawds" ???

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By GruffaloGriff
      This is one my son has had on the go for a while. The wrought iron is a piece i pulled out of a skip, just thought it was mild steel rod, only realized when it was being forged into a pair of tongs. The tongs got abandoned and the wrought iron put to a better use. The blade is leaf spring from a series 2 landy.
      P1100998 by Terry Griffiths, on Flickr">P1100999 by Terry Griffiths, on Flickr">P1110001 by Terry Griffiths, on Flickr">
      Now Complete.
      Blade: Spring steel with satin finish and domed mirror polished spine. Length five and a half inches (145mm), width one and a half inches (38mm), thickness 3/16 (5mm).
      Handle: Utile handle scales on wrought iron frame with copper pins. Wrought iron fittings with copper spacers. Take down construction.
      P1110093 by Terry Griffiths, on Flickr">P1110099 by Terry Griffiths, on Flickr">P1110077 by Terry Griffiths, on Flickr">P1110078 by Terry Griffiths, on Flickr">P1110081 by Terry Griffiths, on Flickr">P1110082 by Terry Griffiths, on Flickr">P1110084 by Terry Griffiths, on Flickr">P1110085 by Terry Griffiths, on Flickr">P1110087 by Terry Griffiths, on Flickr">P1110090 by Terry Griffiths, on Flickr">P1110092 by Terry Griffiths, on Flickr">P1110094 by Terry Griffiths, on Flickr">P1110095 by Terry Griffiths, on Flickr">
    • By GruffaloGriff
      Recently finished this knife. I made it for a "knife in the hat" draw over on EM forum. 
      The style is Kiridashi so ground on one side only with the other flat like a chisel. Ideal for cutting leather or anything else where you would run the blade along a straight edge.
      [url=https://flic.kr/p/2kUct23][img]https://live.staticflickr.com/65535/51130166048_b5602b54f1_b.jpg[/img][/url][url=https://flic.kr/p/2kUct23]P1100987[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kUh6oA][img]https://live.staticflickr.com/65535/51131068850_a16637af01_b.jpg[/img][/url][url=https://flic.kr/p/2kUh6oA]P1100984[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kUbK34][img]https://live.staticflickr.com/65535/51130024819_a4fbe08087_b.jpg[/img][/url][url=https://flic.kr/p/2kUbK34]P1100990[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTrBjU][img]https://live.staticflickr.com/65535/51121609068_eb288c86f1_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBjU]P1100966[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTqLFC][img]https://live.staticflickr.com/65535/51121445434_5bd9c6806b_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLFC]P1100967[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTpafH][img]https://live.staticflickr.com/65535/51121131137_08baea8c3e_b.jpg[/img][/url][url=https://flic.kr/p/2kTpafH]P1100970[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTqLCr][img]https://live.staticflickr.com/65535/51121445249_39f4e8b177_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLCr]P1100971[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTqLAN][img]https://live.staticflickr.com/65535/51121445154_06c5c52abb_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLAN]P1100972[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTrBcK][img]https://live.staticflickr.com/65535/51121608653_cffd15b626_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBcK]P1100973[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTs5GT][img]https://live.staticflickr.com/65535/51121701171_4d40de442f_b.jpg[/img][/url][url=https://flic.kr/p/2kTs5GT]P1100974[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTrBa5][img]https://live.staticflickr.com/65535/51121608498_d007bc1e0d_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBa5]P1100976[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kMHVfX][img]https://live.staticflickr.com/65535/51056892207_85801fcab1_b.jpg[/img][/url][url=https://flic.kr/p/2kMHVfX]P1100912[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kN29jo][img]https://live.staticflickr.com/65535/51060253042_3cf9b1c874_b.jpg[/img][/url][url=https://flic.kr/p/2kN29jo]P1100921[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr








    • By GruffaloGriff
      This blade is made from motorbike chain hand forged on to a leaf spring core. I have experimented a few times with chain Damascus but this is the cleanest weld yet, not perfect but it has character. Very hard to eliminate all the voids in the chain beating it by hand...even though i spent probably half a day hammering away on it.... I will make a press one day.
      I had a smaller knife in mind when i started out but wanted to maximize the lump of rough forged "Damascus" I ended up with so it determined the size & shape of the final blank.
      The blade is 7.5 inches and handle  approx 4.5 so overall something like a 12" Knife.
      Handle is Scottish red stag and the bolster/ pommel are stacked brass & copper soldered together.
       
      P1100805 by Terry Griffiths, on Flickr">

      P1100849 by Terry Griffiths, on Flickr">P1100855 by Terry Griffiths, on Flickr">P1100847 by Terry Griffiths, on Flickr">P1100846 by Terry Griffiths, on Flickr">P1100853 by Terry Griffiths, on Flickr">P1100851 by Terry Griffiths, on Flickr">P1100845 by Terry Griffiths, on Flickr">P1100836 by Terry Griffiths, on Flickr">P1100844 by Terry Griffiths, on Flickr">P1100826 by Terry Griffiths, on Flickr">P1100823 by Terry Griffiths, on Flickr">
      P1100807 by Terry Griffiths, on Flickr">
    • By riohog
      kitchen knives and steak  knives   from bohler n690  and AEB-L stainless     red g10 handles with stainless pins 

    • By GruffaloGriff
      Heard a while back mention of sharpening with MDF wheels but never really paid much attention. I recently thought i would give it a go and turned up a quick MDF wheel on the face-plate of my wood-working lathe. I clamped a makeshift guide to the back of the lathe and worked with the wheel turning away from me. I was blown away by the results! Super sharp paper slicey edge straight off the wheel.
       
      Decided a dedicated MDF wheel sharpener was high on the list of must haves so started gathering bits. I was lucky enough to pick up an old 8" Makita bench grinder on ebay for £25. Everything else is made from scrap bits so that was all the outlay for the build.
       
      I took the guards off the grinder, swapped the switch and the power cable around so the on/off switch is effectively now on the back so the grinder can be operated with the wheels running away from you.
       
      The knife clamp is made from an old door hinge welded to a bit of rod off of some other power tool, hence the nice grippy knob on the end. A 6mm hex bolt through the hinge clamps the knife in place. A cutting of hex bar slides up and down to alter the angle of grind and locks in place with another allan bolt.
       
      Once set up to the desired angle the blade can be sharpened on both sides and both wheels quickly without altering anything.
       
      The MDF wheels are loaded with grey polishing compound and jewelers rouge respectively.
       
      P1100602 by Terry Griffiths, on Flickr">P1100612 by Terry Griffiths, on Flickr">P1100604 by Terry Griffiths, on Flickr">P1100605 by Terry Griffiths, on Flickr">P1100606 by Terry Griffiths, on Flickr">P1100608 by Terry Griffiths, on Flickr">P1100610 by Terry Griffiths, on Flickr">P1100611 by Terry Griffiths, on Flickr">

×
×
  • Create New...