homemade or shop silencers

[spazzy paddy 127]

hi all, has any 1 made their own or modifed the standered 1's to make them more quiet, been told that hair curlers and green scarreres do the trick.atb sp

[paulus 26]

hi all, has any 1 made their own or modifed the standered 1's to make them more quiet, been told that hair curlers and green scarreres do the trick.atb sp

been thinking about drilling a load if holes in the barrel of a 410 and then surrounding in a case thats lagged with loft insulation

[spazzy paddy 127]

hi all, has any 1 made their own or modifed the standered 1's to make them more quiet, been told that hair curlers and green scarreres do the trick.atb sp

been thinking about drilling a load if holes in the barrel of a 410 and then surrounding in a case thats lagged with loft insulation

bit drastic i would rather put something on the end of it like the idea of loft lagging.

[paulus 26]

hi all, has any 1 made their own or modifed the standered 1's to make them more quiet, been told that hair curlers and green scarreres do the trick.atb sp

been thinking about drilling a load if holes in the barrel of a 410 and then surrounding in a case thats lagged with loft insulation

bit drastic i would rather put something on the end of it like the idea of loft lagging.

elf and safety, fire retardent

[spazzy paddy 127]

hi all, has any 1 made their own or modifed the standered 1's to make them more quiet, been told that hair curlers and green scarreres do the trick.atb sp

been thinking about drilling a load if holes in the barrel of a 410 and then surrounding in a case thats lagged with loft insulation

bit drastic i would rather put something on the end of it like the idea of loft lagging.

elf and safety, fire retardent

better safe than sorry.

[Skot Ruthless Teale 1,701]

anybody heard of using a baking potatoe.. ram it on the end of ur barrel, shoot a few shots than your good to go LMAO

[Lewis Ste 245]

I was thinking about this today and thought it wouldn't be to hard 20mm tube few washers as baffles 6mm drilled out tube inside rapped in felt and a big nut that would be welded on the end so it can be screwed on

[8shot 192]

my landlord has made a few silencers. and tbh there the best ive seen(not heard) ive told him to start selling them but he wont do it

[spazzy paddy 127]

my landlord has made a few silencers. and tbh there the best ive seen(not heard) ive told him to start selling them but he wont do it

try and get a few pics up.

[The one 8,552]

My mate had ahand made silencer on his styer ?. but i didn't think it was any better than my shop bought one

[Tron 173]

Hiya paulos, the 410 you mention is I hope, a shotgun? If so shouldent it be on a different forum?

[RiffRaff 5]

hi all, has any 1 made their own or modifed the standered 1's to make them more quiet, been told that hair curlers and green scarreres do the trick.atb sp

 

http://www.thehuntinglife.com/forums/topic/141326-silencer-modifications/page__p__1431600__hl__%2Bair+%2Barms+%2Binternals__fromsearch__1#entry1431600

 

take a look here

[barrywhite 282]

I have made a silencer on a lathe .a large empty tube on a ssp the tube has a bigger volume than the air cylinder and the bits that block the end and screw to the barrel have been made quite accurately .The gun is used from a seated position so size is no problem .It works well quite and accurate.I wonder if putting all this hair curlers and crude baffles out of washer ect may help to make the gun inaccurate as the pellet move through the silencer, and the pellet encounters uneven eddies .So I thought I would make a silencer a big can with tight as possible hole for the pellet to come out .