Millet 4,497 Posted August 16, 2012 Report Share Posted August 16, 2012 ..you beat me too it.. Quote Link to post
keeganrees 196 Posted August 16, 2012 Report Share Posted August 16, 2012 yeahh..ha... but i find is alot better and even sits better to begin with 1 Quote Link to post
freelance 448 Posted August 16, 2012 Report Share Posted August 16, 2012 Cheers for the pics chaps, it is better off side but i still think it is a weak point were the connector goes into the battery and if mine would still do some mods on them. As if the lead gets jerked or gets pulled at full stretch for whatever reason i think that connector will fook up as it is just not robust enough for the job. Deben really should have gone back to the drawing board with this and came up with a better design. Just my thoughts gents Cheers Atb 1 Quote Link to post
storm323 191 Posted August 16, 2012 Report Share Posted August 16, 2012 you got it from athur carter teeth boy . Quote Link to post
Millet 4,497 Posted August 16, 2012 Report Share Posted August 16, 2012 Cheers for the pics chaps, it is better off side but i still think it is a weak point were the connector goes into the battery and if mine would still do some mods on them. As if the lead gets jerked or gets pulled at full stretch for whatever reason i think that connector will fook up as it is just not robust enough for the job. Deben really should have gone back to the drawing board with this and came up with a better design. Just my thoughts gents Cheers Atb I agree 100% with you on that ..them old jack plug's on the old Laserlite/Clulite are much more robust and would of been a better option IMO. 1 Quote Link to post
paulus 26 Posted August 16, 2012 Report Share Posted August 16, 2012 all that money and eveyone is taping everything up me encluded, that cigar socket on mine is the major problem, i tried to direct wire my other one and as has been said the wires just melted and fecked the battery Quote Link to post
Millet 4,497 Posted August 16, 2012 Report Share Posted August 16, 2012 Fook me Paulus..that set up don't look user friendly.. Quote Link to post
haymin 2,465 Posted August 16, 2012 Report Share Posted August 16, 2012 That's what I have to do to mine ,night mare just a pain in the ass . Had enough of it since it seems a comin problem I'm getting untouch f**k it Just don't tell them what you told me about your thumb Knowing me I'll probably have a crack with them and tell them a aboot it lol Quote Link to post
Bosun11 537 Posted August 16, 2012 Report Share Posted August 16, 2012 From the moment I got mine I knew that plug and socket were shite..!! Think I tried it once and it popped out a few times so I changed things. I first cut the wire and put a rubber 2 pin connector on it, low down, the same type used on lawnmowers, as I hate cigar plugs. Then it was the same cable tie job as in Freelance's photos, where the wire (and so the plug) is made stable against the battery. Never bothered with tape, messy, sticky pain in the arse. Never had a problem all last season. Quote Link to post
paulus 26 Posted August 16, 2012 Report Share Posted August 16, 2012 Fook me Paulus..that set up don't look user friendly.. its on a webbing belt. the wire goes through the belt, running 2 dogs on your own everything has to be user friendly 1 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.