HW80 BARREL

[thursodog 353]

Many thanks for the expert advice Simon, thanks also to Tron.

No probs with the scope alignment and it has an arrestor stud fitted too, i'll have a fiddle with my hold and may cut the spring

Brilliant write up as always.

I'll report back on my findings.

 

Cheers the now chris.

[pianoman 3,587]

Many thanks for the expert advice Simon, thanks also to Tron.

No probs with the scope alignment and it has an arrestor stud fitted too, i'll have a fiddle with my hold and may cut the spring

Brilliant write up as always.

I'll report back on my findings.

 

Cheers the now chris.

You're welcome Chris. And thank you.

[thursodog 353]

Well thats the spring cut down and the recoil is much less.

Thinking now that for the final tweak i might fit a Weihrauch moderator to hopefully help even more with the accuracy.

Shooting pretty good for my standards though so its out with the tracer for a bunny or 2 tonight whilst the rain stays off.

 

CW.

[Bryan 1,362]

Old thread,

 

but it got me thinking, who are the best guys nowadays to work on Springers?

[pianoman 3,587]

Depending on what you require to be done Bryan. 

Sandwell Field Sports are brilliant with Springers generally.

Plenty of excellent tuning kits available. And tuners of course.

 

[bigmac 97kt 13,776]

Iv shot Simons hw80 and she is one of the best ones iv shot

and im a man that dose not like brake barrel rifles

its accuracy is amazing .

it would be a shame if the barrel was cut on your rifle Hoff

as say,d before if it aint broke dont fix it

atvbjimmy

[bigmac 97kt 13,776]

And his stock before and after

hoff just take your time when doing the stock and she will be right mate

if you get stuck gis a shout and ill help you

atvbjimmy

[bigmac 97kt 13,776]

lol did not notice it was an old thread lol

[Bryan 1,362]

On 06/09/2018 at 22:25, pianoman said:

Depending on what you require to be done Bryan. 

Sandwell Field Sports are brilliant with Springers generally.

Plenty of excellent tuning kits available. And tuners of course.

 

Just curious as to who's good and I'm always interesting in improvements. In a way I wonder if with time they're be less Springer expertise as people move away from them?

I've a V-Mach tuned HW77 11.7 ft/lbs which is almost recoiless

and a HW   80FAC I fitted a V mach tuning kit into, polished the piston, chamber, opened the transfer port, chopped the barrel (apologies for any offence caused) with a Vemon silencer, that's good for me on rabbits to 55 yards.

I could still fit buttons to the piston 

 

[johnbaz 363]

Hi

I bought this rusty mk1 HW80 for £60 from a local SDS shop, I used the slack part of the belt on a 30"x1" linisher to grind down evenly until I reached the bottom of the pitting, I then polished it on a very fine belt and a friend got it hot chemically reblacked! 

Cost of the reblack was £25 as I did the prep work, It came out OK  

 

After reblacking..

 

I did actually find a .177 cal barrel that I think was cut down and recrowned for my other HW80 which has an HW85 barrel fitted!!

EDIT- Forgot to add a pic straight after the chemical reblack!

 

John 

 

Edited September 22, 2018 by johnbaz

[bigmac 97kt 13,776]

Cracking work John as per mate

atvbjimmy