escortcrazy 2 Posted July 24, 2012 Report Share Posted July 24, 2012 Hi Im Thinking of getting a bsa super ten I havnt got a divers bottle but have got several big compressors for blowing up tractor tyres If i was to fit a water trap on on a compressor so no water came out, is there anyway i can use the compressor to fill a bottle for a super 10 Thanks Owen Quote Link to post
donnyc 1,203 Posted July 24, 2012 Report Share Posted July 24, 2012 doubt it would get anyway near the pressure required mate..big difference in tyres and a buddy bottle Quote Link to post
jmj121 30 Posted July 24, 2012 Report Share Posted July 24, 2012 i would not use a compressor, use a dive center and get a quality - dry - filtered refill, normally about 3 - 4 quid. Quote Link to post
webber 2 Posted July 25, 2012 Report Share Posted July 25, 2012 Water problems aside. You will only get around 10 Bar out of your workshop compressor. You need around 200 Bar for your air rifle. I fill and test cylinders, but sadly you're too far away. webber Quote Link to post
escortcrazy 2 Posted July 25, 2012 Author Report Share Posted July 25, 2012 Thanks ill just buy a divers bottle then Quote Link to post
PLEDGEY 496 Posted July 29, 2012 Report Share Posted July 29, 2012 Thanks ill just buy a divers bottle then Why not get a pump???. I use a pump and they are not hard to use. I only weigh 12 staone and have no problems with it. It's a FX 4 STAGE PUMP, it's called a Turbo pump and goes to 270 bar. Saves haveing to travel to get bottles refilled. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.