davyt63 1,845 Posted July 17, 2012 Author Report Share Posted July 17, 2012 Davy I phoned round the local metal fabricators, my Meteor one cost me a tenner, all smoothed off and nice. hi mike do you still need it? Quote Link to post
Lewis Ste 245 Posted July 17, 2012 Report Share Posted July 17, 2012 Broom shank with notch cut out thats what i use on my supersport Yess java! My mam was wondering why I was chopping the brush up so I don't her and he didn't understand so I didn't hear anything again haha very easy to make davey only need a saw and drill and drill bit mine worked a treat Quote Link to post
superten.177 0 Posted July 18, 2012 Report Share Posted July 18, 2012 Find the correct sized socket that fits inside,then dust off the dremel and cut out where it goes round the retaining pin,bit better than a broom handle!! HW35 is a fiddle Davy,undo the rear pin on the trigger,holding the safety at the same time. Once removed drift out the front pin and remove the trigger. Get a big spanner wrap it in cloth,put it in the trigger housing an tap sharply with a hammer. If the original springs in,put the rear of the cylinder on a cloth on the floor,stand over it gripping firmly and unwind it slowly,towards the end. Job done! Make sure you cock the trigger before you put it back in,once the pins an safetys in,fire it just the sear fires. Now cock and test! Don't worry if its only doing 10.5ft/lb. Get a pellet probe like in the old days! You'll see why on a crono. If you want to test power buy some umarex from jsramsbottom. I get my second 35 next week! Just gave up on the S10,bored of the accuracy. Atb, Steve. Quote Link to post
Goldminer 16 Posted July 18, 2012 Report Share Posted July 18, 2012 Hi Davy thanks for the PM. I am sure I can help if you still need it. Maybee turn up some thing nice in Ali ? Quote Link to post
Buster321c 1,010 Posted July 18, 2012 Report Share Posted July 18, 2012 Well done that man Quote Link to post
davyt63 1,845 Posted July 18, 2012 Author Report Share Posted July 18, 2012 Hi Davy thanks for the PM. I am sure I can help if you still need it. Maybee turn up some thing nice in Ali ? hi Paul yes i still need them! would be nice of you if you could help me out,i will PM you my Mobile number so we can chat about it Quote Link to post
Goldminer 16 Posted July 26, 2012 Report Share Posted July 26, 2012 Here you go Davey I had a think about your spring compressor and came up with this idea. One device in brass with an insert that fits inside it with a flange for the larger diameter spring. This is a prototype so I haven put the usual amount of effort into it but it should work . If yo send me your address I will post it for you to try . Hopefully it will work on both rifles. ATB Coop Quote Link to post
Buster321c 1,010 Posted July 26, 2012 Report Share Posted July 26, 2012 (edited) Thats Cracking Coop , a great job mate . I might pick your brians a while over something ive been messing with . Top job buddy , first class . I love a clever Barstard . Bust . Edited July 26, 2012 by Buster321c Quote Link to post
davyt63 1,845 Posted July 26, 2012 Author Report Share Posted July 26, 2012 hi Paul sorry i missed your call this evening,was out shooting! that looks fantastic!!!!!!! i shall PM you my address you are a star!!!!!!!!!!!!!!!!!!!!!! Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.