I NEED SOME HELP!

[davyt63 1,845]

HI every one

is there any one on here who has access to a lathe?

i need a bridging adapter's made, for when i fettle with spring rifles,this goes over the retainer pin,and the spring is compressed forward by a sash clamp for me to release the pin allowing access to the internals.

 

here is a diagram with measurements,i need 2 one at 24mm OD & 28mm OD

 

 

 

 

i am willing to pay for time & labour

[smithie 2,443]

what is it made from and whats the tolerance +/-? also is the centre boared out? if so how thick are the walls? im asuming the 13mm is the with of the slot not the hole boared down the centre

Edited July 17, 2012 by smithie

[davyt63 1,845]

what is it made from and whats the tolerance +/-? also is the centre boared out? if so how thick are the walls? im asuming the 13mm is the with of the slot not the hole boared down the centre

 

hi Smithie

any mild metal or derlin, tolerance ? it has to be able to push a air rifle spring,yes the centre is boared out, walls 3mm/4mm. yes the 13mm is the with of the slot.

[secretagentmole 1,701]

You doing a Meteor overhaul? They use a spring removal tool of similar dimensions!

[davyt63 1,845]

You doing a Meteor overhaul? They use a spring removal tool of similar dimensions!

 

hi Mike

yes! and for a weihrauch 35 i seen a similar tool in one of the air gun mags

not sure if you could buy them though?

[Buster321c 1,010]

Davy , ask Paul ( Goldminer )

 

Did you not see what he`s done with his TX ?

 

He`s a bit of a machinist ..........

[davyt63 1,845]

Davy , ask Paul ( Goldminer )

 

Did you not see what he`s done with his TX ?

 

He`s a bit of a machinist ..........

 

hi Craig

i didn't even think of Paul,yes i do remember him posting on the AAOC

[risingfriend 1,042]

hi Davy i know john knibbs sell one but rather pricey mate. i will find a link.

 

http://www.airgunspares.com/store/product/7269/Titan-Airgun-Spring-Compressor/

[darkdd81 36]

Hey davy,

 

Two guys where I work run an engineering firm out of one of our units. I'll have a chat with them and see what they say.

[Buster321c 1,010]

 

See mate , i might not have that much fascinating information to share with the world , but i do throw out the odd helpfull bit

[davyt63 1,845]

hi Davy i know john knibbs sell one but rather pricey mate. i will find a link.

 

http://www.airgunspa...ing-Compressor/

 

thanks buddy

 

Hey davy,

 

Two guys where I work run an engineering firm out of one of our units. I'll have a chat with them and see what they say.

 

thanks darkdd81

 

 

See mate , i might not have that much fascinating information to share with the world , but i do throw out the odd helpfull bit

 

thanks Craig

you have always been there for me!!

[java53 30]

Broom shank with notch cut out thats what i use on my supersport

[davyt63 1,845]

hi Davy i know john knibbs sell one but rather pricey mate. i will find a link.

 

http://www.airgunspa...ing-Compressor/

 

jees

that's well expensive, i have the compressor,just need the adapters

[davyt63 1,845]

Broom shank with notch cut out thats what i use on my supersport

 

hi

Any pics

[secretagentmole 1,701]

Davy I phoned round the local metal fabricators, my Meteor one cost me a tenner, all smoothed off and nice.