cool room

[seang 163]

a mate of mine has a cool room for deer its all taking apart he said it just needs be put back together and siliconed up he said he has the thing for the inside the condenser or something but the outside system he dont have he said it would be bout 150 get one for it i know absolutly nothing bout them but could it be set back up to work anyone know cheers

Edited July 5, 2012 by seang

[shootlodge 146]

wow now that was a mouth full without a breath..Anything is possible, whats the thingy missing ? sounds like the motor, condenser unit. A good freezer or van back will have one, try * bay .

[seang 163]

wow now that was a mouth full without a breath..Anything is possible, whats the thingy missing ? sounds like the motor, condenser unit. A good freezer or van back will have one, try * bay .

he said he has the condenser for the inside of it but the motor for outside he dont have i dont think he knos what his on bout either ill try ebay

[SJB1956 0]

My personal view is that you give it a wide berth. Mine is a converted upright fridge minus all the draws. Either side on the top of the fridge drill two holes then cut a piece of ply the same size as the top and then continue to drill two further holes in the ply so that the holes line up. Insert two long bolts down through the top then cut a piece of tube the width of the internal fridge and mark where the bolts touch then drill two more holes through the tube and secure with the correct size nuts. Make sure the fridge has a built-in fan before purchase. I can get two Roe or one Fallow in mine. Hope this maybe of some help.