Lukehunt 15 Posted June 21, 2012 Report Share Posted June 21, 2012 ok basically guys iv just pulled the gun out as im going shooting tmoro to check if its all in working order only to find that when i fire the first shot out of the 10 shot mag its fine, then when i go to load it a second time the magazine wont click round to load the second pellet? anyone ever had this problem or anyone know what i can do? cheers! Quote Link to post
neil82 1,080 Posted June 21, 2012 Report Share Posted June 21, 2012 `with the mag out,cycle the bolt and look to see if the cocking arm actually moves, have had the bolt that secures the rollers (look in the diagram., part no 18)shear off, made out of plastic i think, drilled mine out from the other side with a blunt bit, no damage to the thread so ground down a cap head screw to fit, never had any other problem with it since (except for switching to .177 so its only had about 5k pellets through it) 1 Quote Link to post
hotshot2me 31 Posted June 22, 2012 Report Share Posted June 22, 2012 As Niel82 as said, this happened to my mate a few months back, can happen when you don't raise the bolt vertically enough can sheer off the pin: Dave Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.