secretagentmole 1,701 Posted June 23, 2012 Report Share Posted June 23, 2012 (edited) Adi said to us that on the HW rifle the HW mod usually worked better than a Twink, but as usual individual guns and silencers will give individual results! Just like pellets! Edited June 23, 2012 by secretagentmole Quote Link to post
robwelsh 354 Posted June 23, 2012 Report Share Posted June 23, 2012 Tried them buster, for the size I need it would of been min order of bla bla..and.sent me to the.company that sell the size I'd need n singles..but they don't do the size I need lol I'm sure it was them..iv tried everywhere Quote Link to post
AR177 588 Posted June 23, 2012 Author Report Share Posted June 23, 2012 I dont want to make it louder rob haha! my shroud is a 'tactical' shroud.. when i got the rifle it had been to daystate for some work, and i got a bit of paper saying that they had removed the original shroud - fitted a tactical one and now the SWP of my rifle is 190bar (i have a nice daystate sticker on the side to remind me) now in all honesty i dont have any idea if that makes it quieter as i didnt own the gun before the work was done. I like the sound of the PTFE washers etc i need some of that attention on my ranger ATB Adam Quote Link to post
Buster321c 1,010 Posted June 23, 2012 Report Share Posted June 23, 2012 Ok so what size do you need and whats the probelm ? is it for a shroud ? and if it is cant you just get some shroud supports made ? Quote Link to post
robwelsh 354 Posted June 23, 2012 Report Share Posted June 23, 2012 It's 19mm Od , and the inside is 16mm .. I don't mind getting bigger I'd , and getting bits made up..but its getting hold of one on its own..not bulk buy lol how do u secure 1/2" unf caps to a carbon shroud ? I read earlier that u can't thread it ??? Quote Link to post
Marksman 934 Posted June 23, 2012 Report Share Posted June 23, 2012 It's 19mm Od , and the inside is 16mm .. I don't mind getting bigger I'd , and getting bits made up..but its getting hold of one on its own..not bulk buy lol how do u secure 1/2" unf caps to a carbon shroud ? I read earlier that u can't thread it ??? rivets Quote Link to post
robwelsh 354 Posted June 24, 2012 Report Share Posted June 24, 2012 Pop rivet the cap in Isit? Any I'm fed up of looking Dar , I'm just gonna ring up a and m , see if they will polish internals and have a Fucj about with it to try squeeze few more shots out of it..have them to lob off 5" and wap on a marksman , because their suppose to be quiet, only way to find out is first hand experience lol and iv owned a few silencers, parker gale, mk5, Hw , vc ..so il just see for myself lol any idea how much a an m charge for lobbing 5" off? Lol Quote Link to post
robwelsh 354 Posted June 24, 2012 Report Share Posted June 24, 2012 Forgot to ring them today..I rang scr and didn't seem very helpful, and wouldn't polish internals etc , and tony at sfs pointed me in his direction..sounds like a top bloke, very happy in his job that's for sure..atb Quote Link to post
dave goodall 10 Posted June 24, 2012 Report Share Posted June 24, 2012 (edited) Epoxy resin works a treat rivets wont have a good affect also grub screws carbon threads no problem as long as your carefull with it Edited June 24, 2012 by dave goodall Quote Link to post
robwelsh 354 Posted June 24, 2012 Report Share Posted June 24, 2012 Who done your shroud , and what wall thickness did you use..only one I can find is 1mm wall thickness Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.