lazybones1416 0 Posted March 30, 2012 Report Share Posted March 30, 2012 Quick question been out shooting with a 17 hmr using different ammo and can shoot 20 fine then the next 3 all missfire. is this bad batch of ammo or something else i have cleaned bolt and gun all before shooting but this is a getting a bit to Annoying the firing pin seems ok. please help Quote Link to post
lazybones1416 0 Posted March 30, 2012 Author Report Share Posted March 30, 2012 Quick question been out shooting with a 17 hmr using different ammo and can shoot 20 fine then the next 3 all missfire. is this bad batch of ammo or something else i have cleaned bolt and gun all before shooting but this is a getting a bit to Annoying the firing pin seems ok. please help Quote Link to post
TWOTWOTHREE 152 Posted March 30, 2012 Report Share Posted March 30, 2012 Hi I had this happen with the 22 but only now and then it happened,I was using eley subs, it was only one box that appeared to do this the rest were ok, never done it since, never had it with the ,17 Try a different brand or do a strip clean again Atb 223 Quote Link to post
StevoSmith 147 Posted March 30, 2012 Report Share Posted March 30, 2012 A mate of mine had similar last week with his ruger 10/22 some rounds would fire others would not....turned out it was summit to do with firing mech...brought new one prob solved.....im no expert with rim/cf rifles but this maybe that could be cause Quote Link to post
paulus 26 Posted March 30, 2012 Report Share Posted March 30, 2012 pick 25 random rounds out of the box mix them up in a bag fire as they come out of the bag if it again happens after 20 shots its the rifle not the rounds Quote Link to post
StevoSmith 147 Posted March 30, 2012 Report Share Posted March 30, 2012 pick 25 random rounds out of the box mix them up in a bag fire as they come out of the bag if it again happens after 20 shots its the rifle not the rounds Sound advice paulus Quote Link to post
SNAP SHOT 194 Posted March 30, 2012 Report Share Posted March 30, 2012 I'd say weak firing pin spring, Also check rims on mis fired rounds to see if theres a good indentation, Quote Link to post
The Duncan 802 Posted March 30, 2012 Report Share Posted March 30, 2012 I'd say weak firing pin spring, Also check rims on mis fired rounds to see if theres a good indentation, Same. Paulus suggestion is sound advice too. Quote Link to post
The Duncan 802 Posted March 30, 2012 Report Share Posted March 30, 2012 From the title I was expecting of a hot female teacher at the rifle range Quote Link to post
matt_hooks 188 Posted March 30, 2012 Report Share Posted March 30, 2012 What do the strike marks on the rims look like? Compare a fired round with a misfire, do they look the same? What make of ammunition are they (ok, what are they branded, they're all made by the same factory) Quote Link to post
lazybones1416 0 Posted March 30, 2012 Author Report Share Posted March 30, 2012 All hornady ammo seem ok but the feral was very bad. the strike on bullet was not as deep on the missfire but still hit. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.