Sexy_Shot 5 Posted March 19, 2012 Report Share Posted March 19, 2012 Went out today to shooting some feral pigeons that are a problem for my friends father on his farm, 15 pigeons down, go to cock my brake barrel SMK BS 19 .22 and the barrel goes so its pointing down but wont go the 45 degrees to the stock (where it should compress the spring) drove home, took the stock off and still couldn't ascertain what was wrong, does anyone have any advice/help Many Thanks In Advance Trev Quote Link to post
barrywhite 282 Posted March 19, 2012 Report Share Posted March 19, 2012 I havent taken that gun apart .I think that is what you have to do ,sounds like something is broken a spring or spring guide or some thing ,if the gun will only cock half way.Something wrong with the trigger mechanisum if the gun will almost cock .The only way to find out is to take it apart .If you take the gun out of the stock you may see the problem and fix it . Quote Link to post
Sexy_Shot 5 Posted March 19, 2012 Author Report Share Posted March 19, 2012 Oh right, not gonna lie i'm no gun smith and wont' have a clue Quote Link to post
Buster321c 1,010 Posted March 19, 2012 Report Share Posted March 19, 2012 Get rid and get something decent Quote Link to post
Sexy_Shot 5 Posted March 19, 2012 Author Report Share Posted March 19, 2012 ive got a 12g and a hw 35 but thats not the point, this was my first gun, and i'd like to preserve it Quote Link to post
barrywhite 282 Posted March 19, 2012 Report Share Posted March 19, 2012 your gun is a copy of a weihranch or 95 I think ,there is lots of imformation on how to take hw guns apart on net .also the chinese air gun site...ukchineseairgunforum.. Quote Link to post
Sexy_Shot 5 Posted March 19, 2012 Author Report Share Posted March 19, 2012 your gun is a copy of a weihranch or 95 I think ,there is lots of imformation on how to take hw guns apart on net .also the chinese air gun site...ukchineseairgunforum.. Cheers Barry! Trev Quote Link to post
ghillies 209 Posted March 19, 2012 Report Share Posted March 19, 2012 it might be a mainspring guide lost a flang, the flange covers the hole and stops the bar from the piston from going into the trigger lock bit... Quote Link to post
Sexy_Shot 5 Posted March 19, 2012 Author Report Share Posted March 19, 2012 dads taking it down to the gunsmiths tomorrow, gonna see how much it costs to do, we're both clueless with air rifles, if it costs too much just keep it in the cabinet, wouldn't mind a s410 Trev Quote Link to post
andyfr1968 772 Posted March 19, 2012 Report Share Posted March 19, 2012 If you pay for postage and parts, I'll do the job FOC for you with a service thrown in. PM me if that's what you want to do 1 Quote Link to post
Sexy_Shot 5 Posted March 19, 2012 Author Report Share Posted March 19, 2012 If you pay for postage and parts, I'll do the job FOC for you with a service thrown in. PM me if that's what you want to do I'll have a think but my dad is good friends with the local gunsmith I do clays with him too so i'll see whats up with it first matey Quote Link to post
Buster321c 1,010 Posted March 19, 2012 Report Share Posted March 19, 2012 There's just no pleasing some Quote Link to post
ghillies 209 Posted March 19, 2012 Report Share Posted March 19, 2012 some times diplomacy takes a leed... Quote Link to post
barrywhite 282 Posted March 20, 2012 Report Share Posted March 20, 2012 http://ukchineseairgunforum.myfreeforum.org/about1584.html Quote Link to post
ghillies 209 Posted March 20, 2012 Report Share Posted March 20, 2012 do them chinese guns still have a three stage bang? crack goes the trigger, bang starts the spring and another bang the pellet leaves? lol..sy...lol the ones i've used we're well load, and well ermmm..hmmm how can i say.. fff i wont say. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.