Jump to content

Why is my gun so crap ??


Recommended Posts

I made bits for my stealth they are not complicated .I was able to remove the valve and the brass thing it sits in by getting something pionted into one of thoughs holes under the valve .Or some times pushing the valve open with my hand and pressing it hard against the brass surface and the friction was ehough to grip the brass bit and turn it out.This didnot desturb the factory setting of the valve .I would think the face of the valve is what is leaking .with a bit of auto solve or some fine abrasive past [very fine and very little ]put on the valve face and a bit of slow turning by hand .Then clean 100 persent .May seal the leak.also if you get the valve out you may see the problem .OH EMPTY BOTTLE.

Link to post

Just picked up my hw100t !!!!!!! :). Any one want to buy a stealth lol alot :) jokes I won't really sell !!

Once you've had a few goes with the 100, you'll not pick the stealth up, unless you need to knock tent pegs in or some other similar purpose ;)

Link to post

Just picked up my hw100t !!!!!!! :). Any one want to buy a stealth lol alot :) jokes I won't really sell !!

Once you've had a few goes with the 100, you'll not pick the stealth up, unless you need to knock tent pegs in or some other similar purpose ;)

Lol :)
Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...