B.P.R 2,798 Posted February 5, 2012 Report Share Posted February 5, 2012 Anybody know where to get the devices for cornering a lure line? Or any home made ideas? Thanks Quote Link to post Share on other sites
Ratreeper 441 Posted February 6, 2012 Report Share Posted February 6, 2012 stick a peg in the ground? Quote Link to post Share on other sites
Paid 935 Posted February 6, 2012 Report Share Posted February 6, 2012 take the central part of an old bike wheel, take all the spokes off, and weld a spike on one side, then you have a spinning bearinged thingi, lol, im not describing this well, i'll go dig one out and take a pic ;-) Quote Link to post Share on other sites
Paid 935 Posted February 6, 2012 Report Share Posted February 6, 2012 <p></p> <p> </p> <p></p> <div id="myEventWatcherDiv" style="display:none;"> </div> Quote Link to post Share on other sites
rocky1 942 Posted February 6, 2012 Report Share Posted February 6, 2012 i pal used jocky wheel Quote Link to post Share on other sites
jeppi26 1,855 Posted February 6, 2012 Report Share Posted February 6, 2012 The plastic rims off sack barrows works well mate Quote Link to post Share on other sites
B.P.R 2,798 Posted February 6, 2012 Author Report Share Posted February 6, 2012 i seen them on the internet. they look like really small wheel rims on their side staked into the ground. i will have a look at what i can get hold of. the bike wheel that PAID put up sounds easy, could stake it with a small bit of wood as i dont have a welder and tape it to it. put some sort of foam on the top to prevent injury. thanks Quote Link to post Share on other sites
WHITEYrs4 29 Posted February 6, 2012 Report Share Posted February 6, 2012 Shopping trolley wheel cut the rubber of it and the bracket then put a peg in the center of the wheel Quote Link to post Share on other sites
asha 48 Posted February 6, 2012 Report Share Posted February 6, 2012 tryd a few wheel type things just to return the lure back up to the lure machine,found placeing a carryer bad on wheels pin just to stop the dog running to or mouthing the lure on the turn, Quote Link to post Share on other sites
graham4877 1,181 Posted March 10, 2012 Report Share Posted March 10, 2012 I now make and sell turns http://www.lure-machines.co.uk/ Quote Link to post Share on other sites
long dogs 580 Posted March 10, 2012 Report Share Posted March 10, 2012 wheels off shopping trolleys Quote Link to post Share on other sites
mickmck 716 Posted March 10, 2012 Report Share Posted March 10, 2012 stick a peg in the ground? the line wraps round it Quote Link to post Share on other sites
Paid 935 Posted March 10, 2012 Report Share Posted March 10, 2012 I also cuts through most pegs after a while, friction from the line can cut even metal in a short time Quote Link to post Share on other sites
trooperman 73 Posted March 10, 2012 Report Share Posted March 10, 2012 never made one ,,,,,but could you not just get a length of threaded rod the same thread as the bike wheel nuts and the screw the nuts down, still have the rod turnable but but the long end in the ground, if you get the same thread rod you dont have to weld it up to the lock nut. just a thought. paul Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.