Jump to content

laser cut knife blanks ALL SOLD .


Recommended Posts

hello again 5 blanks in total this timei just want to say sorry but it is first come first serve as usual , some on here don honour agreements and i got left with items !

so there are 4 laser cut and one hand forged damascus blanks.

the laser cuts are as follows .

over all length 8" handle and blade both 4"

they are cut by the laser from 4mm 01 tool steel . then proffesionaly heat treated in a saltbath and tempered inbetween plates to keep them straight . HRC scale of 57-59 so they will hold an edge longer than most but still sharpen when you need to with out power tools.

then i cut the profile of the blade and grind it , they are all flat ground with a very very thin micro bevel and sharp as !!!

they are "smooth finnished" to 120 grt and then buffed with wax . all come with the correct size brass lanyard tube and 2 solid brass pins .

posted to you @ £25 each ALL SOLD .

they have passed aproval by everyone iv showed from climbers feild crafters , hunting and shooting types so im confidant they are good.

im not able to fit handles and sheath these currently so its a project for you !

more to follow soon (some pattern welded stuff and more laser cuts )

DSCF1231.jpg

DSCF1233.jpg

 

next up is a very nice tiny damascus stick tang blade . 4" in total length 2" blade hand forged by me from 15n20 and en45 steel . its heat treated and tempered then acid etched . looks very nice with a deep etch , would look good set in antler maybe .

bargin @ £12.50 postedsold to waidman another nice deal with fast payment !

DSCF1234.jpg

DSCF1235.jpg

as i say watch out for more any day .

all the best matt .

ps please pm before payment if you have bought before there has been problems with paypal.

Edited by midnight
Link to post
Share on other sites

I gotta tell you mate, i wish i had the talent that you have for making knives, i have never made one ( blunted a few :icon_redface: ), would love to try it one day, but i doubt i will. Do you ever sell the finished article, handle, sheath the whole ensemble ? do you make them with over 4" blades?

 

Give credit where credit is due fella, they look top drawer quality, i take my hat off to you :toast:

Link to post
Share on other sites

yes mate i sell loads but there has been great intrest in blanks latly no money about i spose ?

there will be some big and small up for sale mid to end of next week . with a tactical hunter/bush crafter style fully finnished .

pm me your email il send a link to knives iv made .

i have a very skilled fella on here who can and will finnish them to a really good standard . i can pass you on to him if you wanted one finnishing ?

all the best , ps if things go my way you will be able to come on a course with me and forge your own kinfe start to finnish , learn about the steels used and why , everything you might want to know , one day even damascus course !!

Link to post
Share on other sites

thanks again . iv just finnished one of these so will post pics tommorow , as it will be up for sale its sheathed and handled , might help you to see how one looks when there done .

and there is a skilled fella willing to handle and sheath these in small numbers . so dont be put off .

damascus sold !

all the best matt

Link to post
Share on other sites

thanks again . iv just finnished one of these so will post pics tommorow , as it will be up for sale its sheathed and handled , might help you to see how one looks when there done .

and there is a skilled fella willing to handle and sheath these in small numbers . so dont be put off .

damascus sold !

all the best matt

looking forword to seeing that knife matt atb G
Link to post
Share on other sites

here you go one done up tactical !

same type of blank, with the blade cut to differant shape with 2 layer wrapp of 550 paracord , therma plastic sheath made to measure with para belt loop. iv got one of these and hang it from my neck . but you could cord it to anything, lamp battery shoulder strap what ever . the sheath will hold the knife upside down to .2012_0206snow20120011.jpg

2012_0206snow20120006.jpg

 

£45 posted for this bad boy

Link to post
Share on other sites
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By jonesr116
      Haven't been on here in a while and haven't been shooting in a while so I'm deciding so sell some gear and focus on other things.
      Firstly is my BSA lightning tactical xl in .177 comes with hawke hd 3-9x40 scope, one piece mounts and a LED ray gl2 torch with flip up red filter and buffalo river case.
      Only fault with the gun is the front sling swivel is missing.
      I also have a mad dog growler jacket in APG size medium
      A top gun skeet vest size medium
      British army Dpm smock medium-large
      British army issue jungle boots size 11
      Large jack pike shooting hold all
      British army cam net unsure of size but large enough for a personal hide
      I would like to see £130 for the rifle but I'm open to offers for everything together in a bundle
      Collection only for the rifle but the other items I can post and take paypal payments
      I'm in Warminster Wiltshire
      Thanks
    • By cometa300s
         View Advert Bsa r10 se .177 Hello everyone I have forsale my bsa r10 se regulated .177   Reason for selling is I simply don't have the time to get out.   Comes with hawk 3-12x50 sidewinder scopes, bi-pod, solid case,sling plus 2 magazines. Message me if your interested    Advertiser cometa300s Date 15/11/22 Price £550.00 Category Airguns                  



    • By Miikee-L
      £450
       
      Complete setup, including
      Bag
      Sling
      Silencer
      Hawke Panorama Scope
       
      Selling due to it being barley used!!! Perfect Condition!!!
       
       message me on here. Located in the West Midlands and can travel within reason!
       




       
    • By maxtich
      Theoben Rapid MK1 hardwood Walnut Ambi stock in excellent condition.
      Sold Posted In mainland U.K
      On Hold
       
       
       
       
       
       
    • By stoaty
      View Advert Lyn lewiington v mached hw97k 177 SOLD
      SOLD Decided to sell my hw97 it's been tuned by Lyn lewiington stunning bit of kit  . Pick up only. for bare gun willing to part ex it for a nice 177 hw100 STH Wales
      Stoaty
      Advertiser stoaty Date 14/09/21 P Category Airguns  
×
×
  • Create New...