THE GRIFF 8 Posted September 19, 2011 Report Share Posted September 19, 2011 Just changed the batteries in my mk3 collars and receiver and 2 out of them out of the 4 aren't working. They don't even bleep when I try to switch them on. I aren't sure if they were working before I changed the batteries because I haven't used them for a couple of months. Has anyone any ideas, they are less than 12 months old so should still be covered under the warranty, but can't find the receipt. They seem to be a sealed unit so I presume they can't be repaired. Any help or ideas to try and get them working would be appreciated!! Quote Link to post
dymented 2,220 Posted September 19, 2011 Report Share Posted September 19, 2011 try cleaning the cap out bud if its the aluminum one it gets oxidized ect and cant make a proper connection with the battery make sure there nice and shinny inside Quote Link to post
THE GRIFF 8 Posted September 19, 2011 Author Report Share Posted September 19, 2011 I am going to take them into work in the morning and give the connections a clean with isoprphonal, does anyone know if they can be repaired? Quote Link to post
ferretfatcamp 21 Posted September 19, 2011 Report Share Posted September 19, 2011 try cleaning the contact on the coller as well as the cap its rare for the collers to break down and try the batteries even new ones may be flat Quote Link to post
stealthy1 3,964 Posted September 19, 2011 Report Share Posted September 19, 2011 Make sure you have the right batteries for you particular collars, also make sure the batteries are the right way round and have not shorted out Quote Link to post
davewil 2 Posted September 19, 2011 Report Share Posted September 19, 2011 having problem with mine collar switches on and off but batteries going flat in collar over night, i spoke to deben they said nothing they can do Quote Link to post
THE GRIFF 8 Posted September 19, 2011 Author Report Share Posted September 19, 2011 The batteries are correct and testing 1.5 volts. I am going to ring deben tomorrow if I can't get them to work after cleaning the connections. I have heard the aftersales is sh1t with deben, will let you know how I get on! Quote Link to post
davewil 2 Posted September 19, 2011 Report Share Posted September 19, 2011 i have been testing collar batteries brand new ones saying 1.53v i put them in collar switch on and its working fine switch off and left for 1hour then checked batteries one read 1.52 the other was 0.62 they are draining for some reason, but yet collar is switched off, even if it wasnt switched off they should last for days, all deben said was buy a new collar Quote Link to post
PETEWINN 5 Posted October 4, 2011 Report Share Posted October 4, 2011 i have been testing collar batteries brand new ones saying 1.53v i put them in collar switch on and its working fine switch off and left for 1hour then checked batteries one read 1.52 the other was 0.62 they are draining for some reason, but yet collar is switched off, even if it wasnt switched off they should last for days, all deben said was buy a new collar Have had the same problem with a couple of Mk3M collars where I put brand new batteries in the collar and turn them off. A few hours later one of the batteries is flat. If the collar is left turned on then the batteries last as they should. Would love to know how to fix this. Quote Link to post
torchey 1,328 Posted October 4, 2011 Report Share Posted October 4, 2011 try cleaning the contact on the coller as well as the cap its rare for the collers to break down and try the batteries even new ones may be flat I would doubt very much that it is rare mate... Quote Link to post
bandit man 9 Posted October 4, 2011 Report Share Posted October 4, 2011 i have been testing collar batteries brand new ones saying 1.53v i put them in collar switch on and its working fine switch off and left for 1hour then checked batteries one read 1.52 the other was 0.62 they are draining for some reason, but yet collar is switched off, even if it wasnt switched off they should last for days, all deben said was buy a new collar Have had the same problem with a couple of Mk3M collars where I put brand new batteries in the collar and turn them off. A few hours later one of the batteries is flat. If the collar is left turned on then the batteries last as they should. Would love to know how to fix this. i have exactly the same problem with one of mine,i even put sony batteries in just to try normally i can get a good few hours out of them but still flat as a fart next day,i think i prefer the other mk3 collar where you have to remove the batteries at least i can test them before i put em back in!!!! Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.