inherited a s400

[barrywhite 282]

I have just inherited a s400 it was 13 ftlbs .No one messed with the gun it was just over powered .I removed an small allen bolt to gain access to the grub screw[or screws] in the transfer port .I turned the grub screw in a little to get the power down to 11ftlbs.I am wondering is there two grub screws in the hole that blocks the transfer port .Or one grub screw with a locking compound of some sort.I dont wont the grub screw to move.for obvious reasons.The grubscrew was stiff to turn.I wonder why the stiffness was I forcing two grubscews or was it due to a locking compound.If it is a locking compound what is used thanks.

[barrywhite 282]

TO........THEHOFF...Not to good with computers email ect.I do no what to do .but cant explain here to well .a weaker hammer spring is a start .the air has to be chocked of before the valve .and before the barrel .

[Buster321c 1,010]

Bring it round for a service , or if you need to , give me a bell

[moxy 617]

Bring it round for a service , or if you need to , give me a bell

Can i give you a bell, i miss you whispering your sweet nothings in to my ears

[Buster321c 1,010]

You can ring me anytime sweetie

 

in fact , give me a bell next weekend ( if your not working ) we can have a natter .

 

Cheers buddy

[moxy 617]

You can ring me anytime sweetie

 

in fact , give me a bell next weekend ( if your not working ) we can have a natter .

 

Cheers buddy