Jump to content

Fox the other night & roe this morning


Recommended Posts

Hello all my brother & i were lamping the other night & got this lad & seen a few roe so decideed to stalk them on saturdy morning.

Picture259.jpg

 

Made mistake at the roe as 1 of the kid's turned out to be say 2yrs old but there was another buck we let away as he was older & thought it was doe & 2 kid's & a single buck.

Picture258.jpg

 

Picture295.jpg

 

Picture298.jpg

Link to post

Hello & cheer's apollo.Dont get board we tied into the side rail's for selves 2 each side front & back you can see 1" flat x 1" strip of stainless in the pic so you get a squared off u shape i can post a pic if want to see it.I then welded 1" pipe x 1" cut in length to the bar a long the top each side as mount's set 2/3rd's back & 1-2" from roof for clearance of fan in roof.We then got 3/4 stainless bar & cut 1"x1" s/s pipe & welded s/s link's cut to make a small hook like the letter j of the 6 1"x1" bit's of pipr & slide them on to bar.We then cut bar to length & with 1 side fixed put the other u frame on to bar at the mount & then fixed it to the other side do you get the idea.

 

Hello & cheer's apollo.Dont get board we tied into the side rail's for selves 2 each side front & back you can see 1" flat x 1" strip of stainless in the pic so you get a squared off u shape i can post a pic if want to see it.I then welded 1" pipe x 1" cut in length to the bar a long the top each side as mount's set 2/3rd's back & 1-2" from roof for clearance of fan in roof.We then got 3/4 stainless bar & cut 1"x1" s/s pipe & welded s/s link's cut to make a small hook like the letter j of the 6 1"x1" bit's of pipr & slide them on to bar.We then cut bar to length & with 1 side fixed put the other u frame on to bar at the mount & then fixed it to the other side do you get the idea.

Link to post
Hello & cheer's apollo.Dont get board we tied into the side rail's for selves 2 each side front & back you can see 1" flat x 1" strip of stainless in the pic so you get a squared off u shape i can post a pic if want to see it.I then welded 1" pipe x 1" cut in length to the bar a long the top each side as mount's set 2/3rd's back & 1-2" from roof for clearance of fan in roof.We then got 3/4 stainless bar & cut 1"x1" s/s pipe & welded s/s link's cut to make a small hook like the letter j of the 6 1"x1" bit's of pipr & slide them on to bar.We then cut bar to length & with 1 side fixed put the other u frame on to bar at the mount & then fixed it to the other side do you get the idea.

 

Hello & cheer's apollo.Dont get board we tied into the side rail's for selves 2 each side front & back you can see 1" flat x 1" strip of stainless in the pic so you get a squared off u shape i can post a pic if want to see it.I then welded 1" pipe x 1" cut in length to the bar a long the top each side as mount's set 2/3rd's back & 1-2" from roof for clearance of fan in roof.We then got 3/4 stainless bar & cut 1"x1" s/s pipe & welded s/s link's cut to make a small hook like the letter j of the 6 1"x1" bit's of pipr & slide them on to bar.We then cut bar to length & with 1 side fixed put the other u frame on to bar at the mount & then fixed it to the other side do you get the idea.

Thanks for that mate we will be on to that in the morning, we came across a local garage having a refit and we picked up 5 of them and have passed them around our mates, just the job.............

Link to post

hello apollo

 

cheers mate yeah we had a good morning... was my first outing with "multiple boltwork" and i did not too bad me thought.... everything up till now doe wise has been a single "dry" doe or a last years doe calf.

so bit more lessons learned this morning!!!! :):)

 

as for te coke chiller basically what v-max ( my brother ) is saying....all we did was use the existing holes that are in the chiller for shelving ...put up stainless flat bar front and back both sides and cross supported was easy really without any major "fabricating or bastardising" the chiller in any way

 

 

sauer

 

:thumbs-up:

Link to post

Hello i put this on another form & with being honest about a mistake they have hung me.The more iv went over it ie there behavour etc & my usual body wieght's & head's for this time of year the poorer of the 2 has made the other look better/older than it is.It's my usal size of buck kid at just on 27lb & the other at 20.9lb is the poorest iv had.

Link to post
hello apollo

 

cheers mate yeah we had a good morning... was my first outing with "multiple boltwork" and i did not too bad me thought.... everything up till now doe wise has been a single "dry" doe or a last years doe calf.

so bit more lessons learned this morning!!!! :):)

 

as for te coke chiller basically what v-max ( my brother ) is saying....all we did was use the existing holes that are in the chiller for shelving ...put up stainless flat bar front and back both sides and cross supported was easy really without any major "fabricating or bastardising" the chiller in any way

 

 

sauer

 

:thumbs-up:

 

 

:clapper::clapper: Nice to see youre getting out a bit more mate and having good success ..................this is the worst year for me in a long time :angry:

Link to post

Hello i put this on another form & with being honest about a mistake they have hung me.The more iv went over it ie there behavour etc & my usual body wieght's & head's for this time of year the poorer of the 2 has made the other look better/older than it is.It's my usal size of buck kid at just on 27lb & the other at 20.9lb is the poorest iv had.

[/

quote]

V-max---I think I know the forum mate and I also know how easy it is to make mistakes like that .If everybody was honest like you we would find a lot of mistakes from seasoned stalkers so dont loose sleep over it .Good outings there mate . :clapper:

Link to post

Hello & cheer's for your understanding i thought this would happen on the other form but no im f**king useless im only human & tryed to be honest before the deer-police jumped on me.My own fault as i should have taken more time to look at it when dead instead of a 2sec gesstamit it's 2yrs old.It's a kid & the poorer kid at 20.9lb makes it look good & the other at 27lb is my norm a 2yr old would be 30/40lb.I shoot half a dozen yearling's april/may & they are 29/35lb & quite nice head's as 7" spiker's strong 4 pointer's 6/7" tall & odd 6pointer's i grade them as cull or leave.I have 12yrs experiance with roe on a profetional basis Dmq1/2 done 2 level portfolio's as witnessed stalk's & am honest.I was wrong with the 2sec guesstimit of age & got it wrong as my hill roe through me a bit as 27lb is big.

Link to post
Guest J-Jones

:laugh:

Hello & cheer's for your understanding i thought this would happen on the other form but no im f**king useless im only human & tryed to be honest before the deer-police jumped on me.My own fault as i should have taken more time to look at it when dead instead of a 2sec gesstamit it's 2yrs old.It's a kid & the poorer kid at 20.9lb makes it look good & the other at 27lb is my norm a 2yr old would be 30/40lb.I shoot half a dozen yearling's april/may & they are 29/35lb & quite nice head's as 7" spiker's strong 4 pointer's 6/7" tall & odd 6pointer's i grade them as cull or leave.I have 12yrs experiance with roe on a profetional basis Dmq1/2 done 2 level portfolio's as witnessed stalk's & am honest.I was wrong with the 2sec guesstimit of age & got it wrong as my hill roe through me a bit as 27lb is big.

IS THAT A PIC OF YOU VMAX :o:o:o:o:laugh::laugh::laugh:

Edited by J-Jones
Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...