titan 6

[raynard 0]

the last two nights i have been helping a friend zeroing his 243 rws titan, tried two scopes, the barrel is tight, the barrel is clean, the action screws are tight, the moderator is ok , also tried two different bullets hornaday 58g v max, federal 70g v shock, we get two shots about 20 mil apart just where we want them then it goes all over the place and the next two are three inches low the next two somewhere else, has anybody had this problem , if so i could do with some advice please. by the way we are shooting from a bench using a bipod and a sand bag under the stock

[SEAN3513 7]

over what range ??

[raynard 0]

the standard 100yds range

[SEAN3513 7]

thought that would be the case

 

have you tried it with the mod removed ??

[raynard 0]

not tried with the mod removed, just going to try a piece of packing under the floating barrel this afternoon, if this doesnt work then its off to the gunshop to p/x for another, i myself use a t3 varmint so i will try to sway him in that direction