smithie 2,443 Posted April 21, 2011 Report Share Posted April 21, 2011 a friends got a logun axsor with a lose barrel.. can anybody tell me how to tighten it up? thanks smithie Quote Link to post
smithie 2,443 Posted April 21, 2011 Author Report Share Posted April 21, 2011 its ok i found a stripdown guide on another site smithie Quote Link to post
matt_hooks 188 Posted April 22, 2011 Report Share Posted April 22, 2011 Bit late on this one. The loose screw will almost certainly be the one that holds the muzzle end/moderator adaptor on. This is accessed through the charging port, and it is a strange imperial sized alan head machine screw. The heads tend to get chewed up with repeated tightening, not a brilliant piece of design really. I have a few spares lying around if you need one, just PM me your address and I'll chuck a couple in the post. Take the old one out, then put a new one in, with a little loctite or other thread locking liquid, and tighten well. Hope that's useful. Quote Link to post
mark@mbb 31 Posted April 22, 2011 Report Share Posted April 22, 2011 Hello mate i have a webley axsor which is the same rifle there are allen keys near the top of the barrel filling port and this takes the movement out of the barrel when you tighten it up Mark Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.