Jump to content

Recommended Posts


I've heard that too, mate and I've no idea where it came from but it's crap.

 

My 90 shot very well with Baracudas when it had it's .177 barrel but in general springers don't shoot so good with heavy pellet as the power tends to drop off as the weight goes up, not such a problem with .177 though.

 

Cheers.

Link to post

ive read that too aheavy pellet will damage a spring in a spring gun,whats the best limit to go to in a .177 .just fancied a bit more whack with it,cheers.

10.5 grain pellets are ok to use in a 177 the problem arises when you fire 21grains + from a 12fpe gun.I found that 8.5 JSB's were as hard hitting as most other pellets from a springer.Crosman Premiers and Bisley magnum (H&N Baracuda)are the most accurate heavweights.The crossman pellets are the ones in the cardboard boxes mind not the tins.There is a difference and it shows in the balistic efficiency of the real premiers.Some 177 springers need to be retuned to stay at 11+fpe with heavy pellets,just make sure you keep on the legal side if you do this.As when you go back to light pellets you will be way over.

Link to post

I've heard that too, mate and I've no idea where it came from but it's crap.

 

My 90 shot very well with Baracudas when it had it's .177 barrel but in general springers don't shoot so good with heavy pellet as the power tends to drop off as the weight goes up, not such a problem with .177 though.

 

Cheers.

thinking of using something like a 10 grain jsb in my tx would it be up to the job ,im using 8,4 aas at the moment so do you think its worth it or not thanks

Link to post

ive read that too aheavy pellet will damage a spring in a spring gun,whats the best limit to go to in a .177 .just fancied a bit more whack with it,cheers.

10.5 grain pellets are ok to use in a 177 the problem arises when you fire 21grains + from a 12fpe gun.I found that 8.5 JSB's were as hard hitting as most other pellets from a springer.Crosman Premiers and Bisley magnum (H&N Baracuda)are the most accurate heavweights.The crossman pellets are the ones in the cardboard boxes mind not the tins.There is a difference and it shows in the balistic efficiency of the real premiers.Some 177 springers need to be retuned to stay at 11+fpe with heavy pellets,just make sure you keep on the legal side if you do this.As when you go back to light pellets you will be way over.

why would i be way over mate ?

Link to post

ive read that too aheavy pellet will damage a spring in a spring gun,whats the best limit to go to in a .177 .just fancied a bit more whack with it,cheers.

10.5 grain pellets are ok to use in a 177 the problem arises when you fire 21grains + from a 12fpe gun.I found that 8.5 JSB's were as hard hitting as most other pellets from a springer.Crosman Premiers and Bisley magnum (H&N Baracuda)are the most accurate heavweights.The crossman pellets are the ones in the cardboard boxes mind not the tins.There is a difference and it shows in the balistic efficiency of the real premiers.Some 177 springers need to be retuned to stay at 11+fpe with heavy pellets,just make sure you keep on the legal side if you do this.As when you go back to light pellets you will be way over.

why would i be way over mate ?

 

That last bits not really good advice....

 

The reason is spring powered airguns loose efficiency as the weight of the pellet goes up so for example.... A .22 shooting at 11ft-lbs with a 14 grain pellet will drop to around 9 with a 21 grain Baracuda so if the gun's 'tuned' back up with the heavy pellet, it'll be over with a lighter one.

Link to post

ive read that too aheavy pellet will damage a spring in a spring gun,whats the best limit to go to in a .177 .just fancied a bit more whack with it,cheers.

10.5 grain pellets are ok to use in a 177 the problem arises when you fire 21grains + from a 12fpe gun.I found that 8.5 JSB's were as hard hitting as most other pellets from a springer.Crosman Premiers and Bisley magnum (H&N Baracuda)are the most accurate heavweights.The crossman pellets are the ones in the cardboard boxes mind not the tins.There is a difference and it shows in the balistic efficiency of the real premiers.Some 177 springers need to be retuned to stay at 11+fpe with heavy pellets,just make sure you keep on the legal side if you do this.As when you go back to light pellets you will be way over.

why would i be way over mate ?

thank you mate for that :victory:

 

That last bits not really good advice....

 

The reason is spring powered airguns loose efficiency as the weight of the pellet goes up so for example.... A .22 shooting at 11ft-lbs with a 14 grain pellet will drop to around 9 with a 21 grain Baracuda so if the gun's 'tuned' back up with the heavy pellet, it'll be over with a lighter one.

Link to post

I am no expert but, I used crosman premier ultra magnum (10.5g) in my Lightning xl. They hit nearly 2 inches below target at 20mts. Avoid if possible :whistling:

 

I will post some images to see how they perform tomorrow if possible.. :victory:

Edited by mp5
Link to post

I am no expert but, I used crosman premier ultra magnum (10.5g) in my Lightning xl. They hit nearly 2 inches below target at 20mts. Avoid if possible :whistling:

 

I will post some images to see how they perform tomorrow if possible.. :victory:

 

The point of impact will change more often than not when you change ammo, mate, even with pellets of around the same weight. You'll nearly always have to re-zero your scope after a pellet swap.

 

It's how they group that's important. Give them another go and see what the accuracy's like :thumbs: If they don't group well from your gun then try something else.

 

Good luck!!

 

Cheers.

Edited by andyfr1968
Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...