Problem with Webley pump for Webley VV

[Tomm Parr 30]

Hello, hope someone can help me.

 

I have an air charged Webley Venom Viper and a Webley pump. I haven't used the rifle much over the last 2y or so, because of lack of time due to work. A year or so ago i noticed that the pipe leading from the pump to the rifle seemed to have perished a bit and air starts to leak out like a puncture, out once the rifle charging gets to about 150 psi. I used to just angle the pipe and rub it with vaseline, which must have closed the tiny holes and allowed me to charge the rifle up to 200 psi. However now, after not much use for a year, the leaks are too strong and i cannot charge the rifle past 150psi whether i use vaseline or whatever angle i try. I think there about 3 or 4 miniscule holes that i can only see when i put the vaseline on. Can anyone help?

Edited March 29, 2011 by Tomm Parr

[Phantom 631]

Look in the yellow pages and visit your local PIR TEK and get a replacement hose (Far cheaper than your gunshop)

 

[Tomm Parr 30]

  On 27/03/2011 at 13:41, Phantom said:

Look in the yellow pages and visit your local PIR TEK and get a replacement hose (Far cheaper than your gunshop)

 

 

 

Cheers Phantom, Will do.

[secretagentmole 1,701]

Thanks for that tip Phantom, I want a couple of longer hoses as the ones you get from the gun shops are too damned short anyway!