8shot 192 Posted March 24, 2011 Report Share Posted March 24, 2011 ive just been given a dive bottle 12 liter but currantly im using the stirrop pump i have he said that i would need a Aclamp but then what ??? im charging a falcon gun and i dont need a fill adapter as the end of the hose from the pump just screws into my gun any help guys cheers Quote Link to post
secretagentmole 1,701 Posted March 24, 2011 Report Share Posted March 24, 2011 You need a stage one, then a stage 2 with a gauge! Then a whip line that you screw your adaptor into, you also need to check that the cylinder is certified! Quote Link to post
secretagentmole 1,701 Posted March 24, 2011 Report Share Posted March 24, 2011 (edited) Also you need to check the pressure your gun runs at, if you have to pressure the gun to 300 bar and you have a 232 bar cylinder, it is not going to be a great match! Edited March 24, 2011 by secretagentmole Quote Link to post
ArchieHood 3,692 Posted March 24, 2011 Report Share Posted March 24, 2011 Maybe give these a ring to be sure....Best Fittings 1 Quote Link to post
secretagentmole 1,701 Posted March 24, 2011 Report Share Posted March 24, 2011 Good link Archie, ours came with fittings! Quote Link to post
8shot 192 Posted March 24, 2011 Author Report Share Posted March 24, 2011 cheers chaps Quote Link to post
clubshot 22 Posted March 25, 2011 Report Share Posted March 25, 2011 ive just been given a dive bottle 12 liter but currantly im using the stirrop pump i have he said that i would need a Aclamp but then what ??? im charging a falcon gun and i dont need a fill adapter as the end of the hose from the pump just screws into my gun any help guys cheers Barry's picture link might Help http://www.picturetrail.com/sfx/album/view/1468227 BOB/R Quote Link to post
secretagentmole 1,701 Posted March 25, 2011 Report Share Posted March 25, 2011 (edited) Roughly speaking, the first stage is the bit that screws into the divers cylinder, has a control on it (usually a knob but some have dial) to regulate the airflow out of the cylinder. Second stage screws into this, allows the gauge (very important) to be fitted in and the whip line to the charging adaptor. Ok this is what is referred to as the first stage... This is the second stage... Is this any clearer? Edited March 25, 2011 by secretagentmole Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.