Jump to content

Advise needed


Recommended Posts

iv just swaped my gun with someone off here my dad took me out today so i could set my sights and after a couple of shots realised it was not even powerful enough to go through a piece of cardboard at ten yards. So im sick now the gun is a BSA Meteor in .22 can anyone suggest a way to get it more powerful or get it to the power it should be shooting at. any advise much appriceated .thanks lewis

Link to post

No location

 

Need to get it power cheched over a Chrono - Good Shops can do it for small charge

 

Be care if it was powerful and went of the Sub 12FP level they are required to pass it onto Police

 

Sounds if you got a bad deal

 

Springers work best with a lighter pellet - around 14.00 Grains and domed Heads

 

Also being .22 @ what range will it not break through cardboard ?

 

BOB/R

Link to post

No location

 

Need to get it power cheched over a Chrono - Good Shops can do it for small charge

 

Be care if it was powerful and went of the Sub 12FP level they are required to pass it onto Police

 

Sounds if you got a bad deal

 

Springers work best with a lighter pellet - around 14.00 Grains and domed Heads

 

Also being .22 @ what range will it not break through cardboard ?

 

BOB/R

 

Bob the OP did say 10 yards, which makes me think it is well underpowered!

Link to post

as buster said ...... contact the person you did a swap with

 

and always have a trial where possible.

 

and please no "helpful" advice on here please on the ins and outs of how to increase the power.......or the thread WILL go !!!!

 

and

 

:laugh: @ davy

Link to post

I do not think you have upset anyone, we just hate to hear where a trade has gone wrong and someone has got "stuffed" as you appear to have had. A few of us older and wiser ones on here sometimes buy guns, building in the cost of repair (I did on my Super 10). But when you do a straight swap for what appears to be a broken rifle, that is bad. Did you take the gun to his place, did he come to your place, or did you meet somewhere?

Link to post

lewis.....please dont feel you have upset anyone......you certainly havn't.

 

the thing with spring rifles is.....they are quite simple in terms of how they work.

 

may be worth checking the breech seal first....much easier to replace than the spring.

 

and if you do need a spring DO NOT (imo) fit an ox spring......they are not good.

 

it may be an advantage to convert it to gas ram rather than just fitting a new spring.

 

if you pm donnyc on here he may be able to get you one ??

 

cheers

 

sean

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...