bud 5 Posted March 13, 2011 Report Share Posted March 13, 2011 Hi all, my MK2 S200 has developed a leak from the filling connector (the push fit type) I was wondering if i could replace it with the same one i have on my S410? Like this one http://cgi.ebay.co.uk/Air-Arms-S472-Male-Filling-Connector-S400-S410-S510-/120651943794?pt=UK_SportingGoods_Hunting_ShootingSports_ET&hash=item1c176a8f72 It would make my life easier if they were the same as it would mean i wouldn't have to keep changing the connector over on my pump. Many thanks, Paul. Quote Link to post
Buster321c 1,010 Posted March 13, 2011 Report Share Posted March 13, 2011 Its a little bit more involved than a straight swap , but its not too hard . You will need to replace the whole of the filling end of the cylinder , basically from the filling valve body to the filler . Quote Link to post
bud 5 Posted March 13, 2011 Author Report Share Posted March 13, 2011 Thanks Buster, it can be done then? Is it possible to do yourself or will it need to be sent away and done professionally? If i can't do it myself and it's going to cost lots I'll just put the old type back on as its not that much of an inconvenience, just seems a good time to do a swap. Quote Link to post
secretagentmole 1,701 Posted March 13, 2011 Report Share Posted March 13, 2011 Buster I pmd you with a couple of questions about a T200, I also put a thread up in rifle reviews about this! Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.